Koss KS4380-2 manual Selecting a Start Point by Chapter or Time Code

Selecting a Start Point by Chapter or Time Code

You can start playback from a specific title or chapter on a DVD disc.

Note: This function is not available on audio CD’s or MP3 CD’s.

To start playback from a specific title or chapter

1.During DVD playback press the SEARCH button. The Title # / Chapter # bar appears at the top of the screen and the Chapter # field will be ‘highlighted’:

2.Use the number buttons to enter the desired starting chapter number in the ‘highlighted’ field.

Note: When entering single digit title or track numbers, enter ‘0’ first (ie. enter ‘0’, ‘7’ for track 7).

3.To view a different title, after pressing the SEARCH button press the < (left) Navigation button to ‘highlight’ the Title # field, then use the number buttons to enter the desired title number in the highlighted field and press the ENTER or PLAY button to begin playback of the desired title.

To start playback at a specific elapsed time

You can start playback at any specific point in time on a DVD movie disc by entering a time code in the Time Menu. For example, to start playback at a point 1 hour and 15 minutes and 20 seconds from the start of the movie you would key in “1-1-5-2-0” as follows:

1.Press the SEARCH button twice. The Time Menu will appear on the TV screen and the front panel display as follows:

2.Use the number buttons on the remote control to key in the desired starting time. In this example you would press the “1” (hours), “1-5” (minutes), and “2-0” (seconds).

Notes:

￿If the title number, chapter number or time code you input does not exist on the disc, the system will not execute your selection and the selecting menu will disappear.

￿The selecting menu will disappear within a few seconds if you do not input a valid number.

Selecting a CD Track Using Number Buttons

You can select a CD track directly using the number (0-9) buttons.

￿In play or stop mode, press the number button to select the track you want and press ENTER to confirm. The system will go to the beginning of the selected track and start playing it.

￿If the track number is more than 10, press the 2 digits number buttons directly. For example, you want to select the track number 25, press the “2” button and press “5” button, then press the ENTER button.

Note: This function is not available for DVD.

27