Bass and Treble Adjustments | Adjusting the Left/Right Balance |
These adjustments can be made while a movie is playing or while the disc is stopped.
The default setting for the Bass and Treble level is 0dB. To increase or decrease the Bass or Treble levels press the BASS or TREBLE buttons on the remote control. The front panel display will show Bass or Treble and “0 dB”. While the Bass or Treble level appears on the front panel display press the CH.LEVEL “+” ( ) or
If your normal listening position is closer to one side of your room rather than in the exact center, you can compensate by adjusting the Balance control.
Press the CH.LEVEL button on the remote control. The balance setting will appear on the front panel display as follows:
The above display indicates an equal balance between the left and right speakers. To shift the balance to the right, press the “+” ( ) button. To shift the balance to the left, press the
Center Level, Rear Level, and Subwoofer Level Adjustments
If the sound from the center speaker or rear speakers, or the subwoofer is too strong or too weak while you are watching a movie you can adjust those levels with the CH.LEVEL and +/- buttons on the remote control. Press the CH.LEVEL button repeatedly until the front panel display shows the speaker that you wish to adjust:
CENTER,
“
Other Sound Effects
When listening to music press the DSP Mode button on the front panel of the receiver or the SURROUND button on the remote repeatedly to cycle through the following special Surround Sound options: PRO LOGIC
3 STEREO CONCERT LIVING HALL BATH ROOM CAVE ARENA CHURCH STEREO PRO LOGIC. Select the option that provides the most desirable effects for the particular type of music that you are playing.
43