Amana AMH* Blower Performance Specifications, CFM & Temperature Rise vs. External Static Pressure

BLOWER PERFORMANCE SPECIFICATIONS

(CFM & Temperature Rise vs. External Static Pressure)

Model	Motor	Tons AC				EXTERNAL STATIC PRESSURE (Inches Water Column)
( HeatingAs ShippedSpeed )		at 0.5"	0.1				0.2			0.3			0.4			0.5			0.6		0.7	0.8
	Speed
		ESP	CFM	RISE			CFM	RISE		CFM	RISE		CFM	RISE		CFM	RISE		CFM	CFM		CFM
	HIGH	3.0	1521		22		1466		23	1414		24	1373		24	1298		26	1243		1164	1075
*M(H/S)80453A***	MED	2.5	1160		29		1160		29	1132		29	1121		30	1082		31	1042		997	925
(MEDIUM)	MED-LO	2.0	961		35		955		35	948		35	932		36	913		37	882		821	803
	LOW	1.5	781		43		785		42	781		43	773		43	761		44	745		716	668
	HIGH	3.0	1422		36		1352		38	1307		40	1197		43	1157		45	1092		1075	983
*M(H/S)80703A***	MED	2.5	1098		47		1081		48	1051		49	1039		50	1021		51	983		924	868
(MEDIUM)	MED-LO	2.0	919		56		913		57	892		58	847		----	829		----	818		792	728
	LOW	1.5	758		----		741		----	741		----	733		----	699		----	677		649	626
	HIGH	4.0	2134		----		2100		25	2042		25	1975		26	1883		28	1786		1700	1601
*M(H/S)80704B***	MED	3.5	1668		31		1663		31	1656		31	1645		32	1616		32	1549		1492	1391
(MEDIUM)	MED-LO	3.0	1419		37		1426		36	1426		36	1432		36	1419		37	1378		1328	1261
	LOW	2.5	1134		46		1145		45	1166		44	1171		44	1160		45	1144		1111	1071
	HIGH	3.0	1607		41		1572		42	1547		43	1498		45	1448		46	1390		1302	1222
*M(H/S)80903B***	MED	2.5	1159		58		1156		58	1145		58	1127		59	1108		60	1075		1033	957
(MEDIUM)	MED-LO	2.0	938		----		916		----	916		----	900		----	889		----	865		829	785
	LOW	1.5	785		----		766		----	743		----	730		----	709		----	683		666	604
	HIGH	4.0	2051		----		1983		----	1895		35	1812		37	1725		39	1627		1530	1439
*M(H/S)80904B***	MED	3.5	1736		38		1708		39	1652		40	1611		41	1540		43	1475		1394	1307
(MEDIUM)	MED-LO	3.0	1493		45		1668		40	1459		46	1429		47	1389		48	1339		1274	1204
	LOW	2.5	1200		56		1185		56	1180		56	1173		57	1158		58	1125		1125	1080
	HIGH	5.0	2290		----		2229		----	2155		----	2047		----	1960		----	1837		1712	1584
*M(H/S)80905C***	MED	4.0	1852		36		1820		37	1777		38	1719		39	1641		41	1567		1469	1382
(MEDIUM)	MED-LO	3.5	1615		41		1592		42	1556		43	1516		44	1470		45	1405		1346	1235
	LOW	3.0	1290		52		1285		52	1265		53	1235		54	1214		55	1174		1044	904
	HIGH	5.0	2323		37		2225		38	2120		40	2040		42	1974		43	1801		1688	1577
*M(H/S)81155C***	MED	4.0	1858		46		1847		46	1799		47	1744		49	1674		51	1577		1493	1399
(MEDIUM)	MED-LO	3.5	1596		53		1587		54	1571		54	1552		55	1493		57	1397		1326	1217
	LOW	3.0	1291		----		1272		----	1261		----	1257		----	1205		----	1168		1118	1060
	HIGH	5.0	2469		42		2389		43	2300		45	2223		47	2131		49	2027		1902	1786
*M(H/S)81405D***	MED	4.0	1575		66		1558		67	1545		67	1513		69	1500		69	1419		1354	1271
(MEDIUM)	MED-LO	3.5	1402		----		1380		----	1343		----	1319		----	1296		----	1245		1183	1106
	LOW	3.0	1200		----		1186		----	1161		----	1127		----	1082		----	1042		995	926

NOTES:

1. CFM in chart is without filters(s). Filters do not ship with this furnace, but must be provided by the installer.

2. All furnaces ship as high speed cooling. Installer must adjust blower cooling speed as needed.

3. For most jobs, about 400 CFM per ton when cooling is desirable.

4. INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.

5. The chart is for information only. For satisfactory operation, external static pressure must not exceed value shown on rating plate. The shaded area indicates ranges in excess of maximum external static pressure allowed when heating. The data for 0.6" w.c. to 0.8" w.c. is shown for air conditioning purposes only.

6The dashed (---) areas indicate a temperature rise not recommended for this model.

7.The above chart is for U.S. furnaces installed at 0-2000 feet. At higher altitudes, a properly derated unit will have approximately the same temperature rise at a

particular CFM, while the ESP at that CFM will be lower.

13