Williams 4003532, 2503532 Local Codes, Unpacking, Product Features, Specifications

Page 3

OWNER’S MANUAL

LOCAL CODES

Install and use furnace with care. Follow all local codes. In the absence of local codes, use the latest edition of the following:

National Fuel Gas Code ANS Z223.1, also known as NFPA 54 * (USA)

National Electric Code ANS/NFPA 70*

CAN/CGA-B149[.1 or .2] Installation Codes** (Canada).

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

**Available from:

UNPACKING

1.Remove furnace from carton.

2.Remove all protective packaging ap- plied to furnace for shipment.

3.Remove the following items from carton:

Hardware package containing four large screws, two small screws, and thermostat mounting plate

Hardware package (thermostat and two screws)

Equipment shutoff valve

If any of these items are missing, promptly inform dealer where you bought furnace.

4.Check furnace for any shipping damage. If furnace is damaged, promptly inform dealer where you bought furnace.

PRODUCT

FEATURES

HOT SURFACE IGNITOR

This furnace has an electronic ignitor. There is no standing pilot. No matches or batteries are required.

THERMOSTATIC HEAT CONTROL

The thermostat is temperature sensitive. It automatically turns the furnace on and off. This results in the greatest heating comfort. This can also result in lower gas bills.

LIMIT SWITCH

The limit switch shuts off the gas to the main burner if the furnace becomes too hot to operate safely.

Standards Council of Canada

350 Sparks Street

Ottawa, Ontario K1R 7S8

This furnace must be grounded when in- stalled. Follow all local codes. In the ab- sence of local codes, refer to the National Electrical Code ANS/NFPA No. 70 (U.S.A.) or CSA C22.1 Canadian Electrical Code, Part I (Canada).

The installation must conform with local codes, in the absence of local codes, with the National Fuel Gas Code, ANS Z223.1/Ca- nadian Installation Code, CAN/CGA B149.

When installing furnace in a manufactured (mobile) home, follow the Manufactured Home Construction and Safety Standard, Title 24CFR, Part 3280 (formerly the Fed- eral Standard for Mobile Home Construc- tion and Safety, Title 24, part 280; 1975). When such a standard is not applicable, follow the Standard for Manufactured Home Installations, 1982 (Manufactured Home Sites, Communities, and Set-Ups), ANS A225.1/NFPA 501A.

In Canada, install furnace in accordance with Standard CSA Z240.4 - Gas Equipped Recre- ational Vehicles and Mobile Housing and any applicable local codes and regulations.

Appliance input ratings are based on sea level operation and need not be changed for operation up to 2,000 feet elevation. For operation at elevations above 2,000 feet, manufactured to specified deration condi- tions for Canada and the United States.

SPECIFICATIONS

 

25,000 Btu/Hr

40,000 Btu/Hr

*Rated Heating Input (BTU/Hr)

25,000

40,000

Thermal Output Capacity

 

 

(average loss calculation)

18,750 Btu/Hr

30,000 Btu/Hr

Type Gas

Natural Only

Natural Only

Ignition

Hot Surface Ignitor

Hot Surface Ignitor

Operating Amps

1.5

2

Volts/Cycles

120/60

120/60

Main Burner

1

2

Pressure Regulator Setting

3.5" W.C.

3.5" W.C.

Inlet Connection

3/8 NPT

3/8 NPT

Inlet Gas Pressure (in. of water)*

 

 

Maximum

7"

7"

Minimum

5"

5"

Dimensions, Inches (H x W x D)

 

 

Furnace

15 3/32 x 16 1/8 x 23 5/8

15 3/32 x 21 3/4 x 23 5/8

Weight (pounds)

 

 

Furnace

53

71

Shipping

65

98

* For purposes of input adjustment.

201842

3

Image 3
Contents OWNER’S Operation and Installation Manual For Your SafetyFor Your Safety What to do if YOU Smell GAS Safety Information Unpacking Product FeaturesSpecifications Local CodesLocating Furnace InstallationInstallation Items Check GAS TypeCreating Wall Opening and Mounting Furnace Installing ThermostatInstalling in Normal Frame Wall Installing in Masonry WallRouting Thermostat Cable Locating Thermostat on WallConnecting to GAS Supply Connecting Furnace to Gas Supply at Front of FurnaceMounting the Thermostat to Wall Removing Screws on Lower Flange 40,000 BTU/Hr Model Shown Connecting Furnace to Gas Supply at Rear of FurnaceExample Providing Gas Piping to FurnaceChecking GAS Connections Pressure Testing Gas Supply Piping SystemPerformance Check Pressure Testing Furnace Gas ConnectionsFor Your Safety Read Before Lighting Operating FurnaceOperating Instructions Thermostat Control Operation Inspecting Burner FlameNormal Operating Sequence To Turn OFF GAS To FurnaceCleaning and Maintenance Observed Problem Possible Cause Remedy TroubleshootingIgnition Failures Observed Problem Possible Cause Wire and wire connections at probe Parts Wiring Diagrams ReplacementService Hints Technical ServiceCabinet Assembly 25,000 BTU/HR Model Illustrated Parts ListCabinet Assembly 40,000 BTU/HR Model Combustion Chamber Assembly 25,000 BTU/HR Model Combustion Chamber Assembly 40,000 BTU/HR Model Burner Assembly 25,000 BTU/HR Model Burner Assembly 40,000 BTU/HR Model Blower Assembly 25,000 BTU/HR Model Blower Assembly 40,000 BTU/HR Model Limited Warranty Williams GAS Wall Furnace Warranty Information

2503532, 4003532 specifications

The Williams 4003532,2503532 represents a significant advancement in modern technology, embodying a blend of innovative features and state-of-the-art components designed to enhance user experience across a variety of applications. This model is a prime example of Williams' commitment to quality and efficiency, making it a top choice for consumers seeking reliability and performance.

One of the standout features of the Williams 4003532,2503532 is its robust build quality. Engineered with precision, it utilizes high-grade materials that not only ensure durability but also contribute to its lightweight design. This combination makes the device easy to transport while maintaining its structural integrity, even in challenging environments.

In terms of technology, the Williams 4003532,2503532 is equipped with advanced processing capabilities that facilitate seamless operation. The integrated chipset provides rapid response times, which is crucial for applications requiring high-speed data processing and real-time analysis. This feature is particularly beneficial in fields such as telecommunications, where efficiency is paramount.

Furthermore, the device supports a wide array of connectivity options, ensuring compatibility with various peripherals and systems. This versatility allows users to integrate the Williams model into their existing setups without the need for extensive modifications. The inclusion of both wired and wireless connectivity options makes it adaptable for diverse usage contexts, whether in a professional setting or at home.

Another significant characteristic of the Williams 4003532,2503532 is its user-friendly interface. Designed with the end-user in mind, the interface facilitates easy navigation through features and settings, making it accessible even for those who may not be tech-savvy. This focus on usability enhances the overall experience, allowing users to maximize the potential of the device without a steep learning curve.

Additionally, energy efficiency is a core attribute of the Williams 4003532,2503532. The technology implemented in this model is aimed at minimizing power consumption while optimizing performance. This not only contributes to cost savings in the long run but also aligns with growing environmental concerns surrounding energy usage and sustainability.

In summary, the Williams 4003532,2503532 stands out due to its exceptional build quality, advanced technological specifications, versatile connectivity options, user-friendly interface, and energy efficiency. Together, these features make it an ideal choice for a wide range of users looking for a reliable and high-performing device that can meet their demanding needs. As technology continues to evolve, the Williams 4003532,2503532 sets a benchmark for what consumers can expect from modern devices.