Superior BC36MH, BCD36MH installation instructions FTF8 at 1 USA, 14-1/2, 12/12

6

Optional
Floor
Bracket
1 ¹⁄₂"	Metal Safety Strips
Figure 8

Blocking

Metal Safety Strips

Figure 9

Step 3. Refer to fireplace drawings and speci- fications on Pages 6 and 7 for framing dimen- sions and details. Frame appliance enclosure as illustrated in Figure 12 on Page 7.

WARNING

Under no circumstances can the fireplace top spacers (see Figure

12)be removed or modified, nor may you notch the header to fit around or be installed lower than the spacers. The header may be in direct contact with the top spacers but may not be supported by them.

		B
	A
Ceiling Framing
Framing Dimensions for Ceiling
Framing Dimensions for Ceiling
Inches (millimeters)
Flue Type	A	B
FTF8, Vertical	14-1/2"	14-1/2"
	(368 mm)	(368 mm)
FTF8 Offset 30°	14-1/2"	25"
	(368 mm)	(635 mm)
Figure 10

Note: The framed depth, 20-5/8" (524 mm) from a framed wall, must always be measured from a finished surface. If a wall covering such as drywall is to be attached to the rear wall, then the 20-5/8" (524 mm) must be measured from the drywall surface. It is important that this dimension be exact.

If the appliance is to be elevated above floor level, a solid continuous platform must be constructed.

The header may rest on the top metal spacers, but must not be notched to fit around them.

Consult all local codes.

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

D		C
	Roof Framing
Framing Dimensions for Roof
	Inches
Pitch	FTF8 at 1" (USA)
	C	D*
0/12	14-1/2"	14-1/2"
6/12	14-1/2"	17"
12/12	14-1/2"	21-1/2"
* Perpendicular to roof ridge
Figure 11