Charging the Battery
CP185
GETTING STARTED
1.Make sure the radio is OFF.
2.Plug the power supply into an electric outlet.
3.Connect the power supply output cord connector into the rear of the Desktop Charging Tray.
4.The LED on the charger blinks green once to indicate charger is turned ON.
5.Turn the radio OFF before charging the battery. Insert a battery, or a radio with a battery into the charger’s pocket by:
aligning the groove on each side of the battery with the corresponding raised rail on each side of the charger pocket
OR
pressing the battery towards the rear of the pocket
OR
sliding the battery into the charger pocket, ensuring complete contact between the charger and battery contacts.
6.The charger’s LED color will indicate the battery charging status. (See “Charging Status” on page 11).
Refer to picture below for the battery insert visual guide line.
Battery insert visual guide line
Battery Charging Tray