VOICE OPERATED TRANSMIT (VOX)
VOX needs to be enabled for each channel in Customer Programming Software (CPS) before VOX Accessories can be used with radio. When the VOX headset/microphone is connected, your radio may be used in
To start the VOX feature
1.Connect the VOX headset to the accessory connector of the radio. Make sure the radio is turned OFF before connecting the VOX accessory.
2.Turn the radio ON.
To disable the VOX feature
1.Press the PTT button on the radio. This allows you to use the VOX headset, but you must press the radio PTT to transmit.
To re-enable the VOX feature
1.Turn the radio OFF, and turn it ON again, with the headset connected to the accessory connector, or
2.Change channel with the VOX headset connected.
To adjust the VOX sensitivity level, see “ACCESORY (Accessory)” on page 17 of this user guide.
VOICE OPERATED TRANSMIT (VOX)
13English