General Information

These decorative screen doors are offered in two attractive finishes and fit on the face of the appliance over the glass doorframe. If you encounter any problems, need clarification of these instructions or are not qualified to properly install this kit, contact you local distributor or dealer.

WARNINGS

Hot! Do not touch! The decorative screen doors and the glass behind the screen doors will become hot during operation and will retain heat for a while after shutting off the appliance. Severe burns may result. Carefully supervise children in the same room as appliance.

•These decorative screen doors are NOT heat guards and are not intended to prevent burns.

•Operate the doors by only using the door handles. Avoid touching the doorframe, screens, or the glass enclosure, if the door is opened.

•Use care when opening doors. Avoid exerting any downward pressure on the doors when they are in an open position. Excessive force can cause the doors to come loose or be damaged.

•INSTALL ONLY WHEN THE FIREPLACE IS OFF AND COLD!

INSTALLATION INSTRUCTIONS:

1. Remove and retain the Lower Panel per instructions in Figure 1.

Retain the lower panel for future use in case the Style View Door Kit is ever removed.

*NOTE: The fireplace is equipped with a unit-mounted ON/OFF switch. In most installations this switch is not used. If you desire to use the switch and want to install these Style View Doors, you may desire to relocate the switch into the bracket provided on the door frame. This is OPTIONAL. If you desire to relocate the switch complete the optional procedures indicated by the asterisks below. Steps 2, 4 and 5 refer to ELDV Models only. For MPLDV Models, purchase a Rocker Switch kit model FRS (80L41).

*2.Remove the Piezo / Switch Bracket from fireplace control compartment by pulling it forward as shown in Figure 2 (also see Figure 6).

Piezo & Switch

Bracket

Piezo & Switch

Locating Bracket

Figure 2

*3. Disconnect the black and white wires from the ON/OFF switch.

*4. Remove the ON/OFF switch from the bracket by squeezing the flex catches on sides of switch until it releases from bracket.

*5. Reinstall the bracket with the piezo (reverse Step 2).

6. Remove Doorframe from packaging. Install as follows:

*a.Position switch wires in front, inside of control compartment (so they can easily be reached after doorframe is in position).

b.Position the bottom of the doorframe so that the bracket on the inside of the doorframe locks behind the cabinet bottom flange as shown in Figure 4.

*c. Feed the switch wires through the switch mounting bracket on doorframe as shown in Figure 3.

Removethislowerpanel
by lifting it up and out.	Figure 1

Switch Mounting

Bracket on

Doorframe

Figure 3

Wires for ON/OFF switch

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

APDL45SP, SPDL45SP, SPDML45SP, SPDML35SP, SPDL45C specifications

Lennox Hearth has established itself as a leader in the home heating industry, and their range of gas fireplaces, including the SPDL35C, SPDML40SP, SPDML45SP, APDL35C, and APDML35C models, exemplifies their commitment to quality, efficiency, and innovation.

The SPDL35C is tailored for those who desire warmth with a modern aesthetic. This model features an impressive sleek design that complements any contemporary space. With an efficient heating capacity, it utilizes Direct Vent technology, allowing for fresh air intake from outside, which enhances combustion efficiency while minimizing indoor air pollution.

Moving on to the SPDML40SP, this model is larger and boasts enhanced heating capabilities. One of its standout features is the multi-speed blower, which ensures optimal air circulation throughout the room. The intuitive controls allow users to customize their heating experience easily, while the flame presence and glass design create a captivating visual centerpiece.

The SPDML45SP takes luxury to the next level, featuring a larger viewing area that maximizes the flame's visual impact. The patented burner design produces vivid flames that create a cozy environment. Moreover, this model is compatible with Lennox's smart technology, allowing users to control their fireplace through a mobile app, making it convenient and tech-savvy.

For those seeking a more traditional appearance, the APDL35C offers a classic design combined with modern efficiency. Its unique design elements, including customizable log sets and realistic ember beds, provide an authentic fireplace experience. This model also incorporates the same Direct Vent technology, providing optimal heat while ensuring safety.

Lastly, the APDML35C model combines the elegance of traditional design with modern advancements. With impressive energy efficiency ratings, it also features a sealed combustion system that draws air from outside, maximizing efficiency and minimizing heating costs.

All of these Lennox Hearth models share critical characteristics such as quick-heating capabilities, customizable options, and user-friendly controls, ensuring comfort for any home. The combination of advanced technologies and stylish designs makes each model not only a source of heat but also an aesthetic addition to any living space. Lennox Hearth products exemplify the perfect blend of function and style, ensuring homeowners can enjoy the warmth and ambiance of a fireplace year-round.