Lennox Hearth EBSTPM-2 Lighting Instructions Millivolt GAS Valve, To Turn OFF GAS to Appliance

Page 14

LIGHTING INSTRUCTIONS – MILLIVOLT GAS VALVE

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION

MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

A.This appliance has a pilot which must be lighted with a piezo ignitor. When lighting the pilot, follow these instructions exactly.

B.BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Extinguish any open flame.

•Open windows.

•Do not light any appliance.

•Do not touch any electrical switches.

•Do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone.

•If your gas supplier cannot be reached, call the fire depart- ment.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or an explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above on this page.

2.Access the lower control compartment.

3.Turn remote wall switch to “OFF.”

4.Verify main line shut-off valve is open.

5.Push in gas control knob slightly and turn clockwise

to “OFF.”

 

 

 

 

OUT

 

IN

TPTH

 

 

 

 

 

 

TP

 

 

I H

 

 

 

 

 

 

OFF

 

 

 

 

 

P

 

 

 

 

 

 

 

 

 

 

 

 

I

 

 

 

L OW

it

 

L

TH

 

 

 

O

 

 

 

 

T

 

 

 

 

 

O

 

 

 

 

N

 

 

 

 

 

 

 

 

 

 

P

 

 

 

 

 

I

 

 

 

 

L

 

 

 

 

 

TO

 

 

 

 

 

Note: Knob cannot be turned from “PILOT” to “OFF” unless the knob is pushed in slightly. Do not force.

6.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow “B” in the safety information above on this page. If you do not smell gas, go to the next step.

7.Push in gas control knob slightly and turn counterclockwise

to “PILOT.”

8.Push in control knob all the way and hold in. Immediately light the pilot by triggering the spark ignitor (pushing the button) until pilot lights. Continue to hold the control knob in for about 1 ¹⁄₂ minutes after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

• If pilot will not stay lit after several tries, turn the control knob to “OFF” and call your service technician or gas supplier.

9. Turn gas control knob counterclockwise to “ON.”

10.Close lower control compartment.

14

TO TURN OFF GAS TO APPLIANCE

1.

Turn remote wall switch “OFF.” The pilot will remain lit for

4.

Depress gas control knob slightly and turn clockwise

 

normal service.

 

to “OFF.” Do not force.

2.

For complete shutdown, turn remote wall switch to “OFF.”

5.

Close lower control compartment.

3.Access the lower control compartment.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Retain These Instructions For Future Reference Table of Contents CongratulationsControl Compartment Access Millivolt Control Valve Shown Operation and Care of Your ApplianceElectronic Appliances GasControls/ControlCompartmentAccessMillivolt Appliances Manifold Pressure PortOutside Combustion Air Controls Variable Flame Height Adjustment Millivolt Appliances onlyVenting Action and Safety Limit Operation Outside Air Control Lever Securing Screw LocationManual-Reset Safety Limit Switch MaintenanceFront Glass Enclosure Panel, Removal and Installation Safety Switch Location EBCL-2 ShownClean Glass While IT is HOT Maintenance ScheduleMaintenance Task Accomplishing Person Procedure Propane Burner AdjustmentsMain Burner Factory Shutter Setting ModelsBurner Positioning Log PlacementInstall the unitized log set Bottom of the log set is notched to accommodate the pilotLennox Hearth Products WarrantyReplacement Parts Product Reference InformationON/OFF Wall Switch Kit Accessory ComponentsStandard Remote Control System Model RCL Door Frame KitsCharcoal Finish Louvers Kits Deluxe Remote Control System Model RCL-TAccessory Components Polished Brass and Brushed Stainless Hood KitsScreen Panel Kit Piece Polished Brass and Brushed Stainless Louvers KitsPolished Brass and Brushed Stainless Louvers Kits Touch-Up Paint KitTo Turn OFF GAS to Appliance Lighting Instructions Millivolt GAS ValveLighting Instructions What to do if YOU Smell GASPour Fermer LE GAZ QUI Alimente L’APPAREIL Instructions D’ALLUMAGE Vanne GAZ MillivoltInstructions Dallumage To Shut OFF Lighting Instructions ElectronicWhat to do if YOU Smell GAS Front ViewPour Éteindre L’APPAREIL Instructions D’ALLUMAGE ElectronicInstructions D’ALLUMAGE Pour Fermer LE GAZ QUI Alimente L’APPAREILSymptom Possible Causes Corrective Action Troubleshooting the Electronic Ignition System Check vent system for obstructionsGAS Orifices SIT and Honeywell Systems GAS Controls SIT MillivoltGAS Controls Honeywell Electronic DescriptionNatural and Propane Qty Replacement Parts ListDescription 3a10 Cabinet Corner Post Location 11a 11b31 37 13a 13b Rear Burner Front BurnerPage 875,012M REV. D 05/2004

EBSTNM-2, EBSTPM-2 specifications

Lennox Hearth is a reputable name in the heating and ventilation industry, known for producing high-quality, energy-efficient heating solutions. Among their impressive lineup, the EBSTPM-2 and EBSTNM-2 models stand out for their superior performance and innovative features.

Both models are designed to provide reliable warmth in residential settings while ensuring ease of use and energy efficiency. The EBSTPM-2 comes with a robust pellet-burning system, boasting a high-efficiency rating that ensures optimal heating output with minimal energy consumption. This model is particularly praised for its environmentally friendly operation, utilizing wood pellets as a renewable energy source.

The EBSTNM-2, on the other hand, features a natural gas burning system that offers convenience and clean-burning technology. With its powerful output and adjustable flame settings, users can customize their heating experience to suit their comfort levels. Both models showcase advanced combustion technology, which ensures that they operate efficiently while minimizing emissions and maximizing heat distribution throughout the space.

One of the key characteristics of the Lennox EBSTPM-2 and EBSTNM-2 is their sleek, modern design. They are constructed with high-quality materials that not only enhance durability but also complement various interior aesthetics. The intuitive controls are user-friendly, making temperature adjustments quick and easy.

Safety features are paramount in both models, with built-in mechanisms that prevent overheating and ensure safe operation. This highlights Lennox’s commitment to user safety and product reliability. For added convenience, both models are equipped with an automatic ignition system, allowing for a hassle-free startup process.

Finally, the compact size of the EBSTPM-2 and EBSTNM-2 makes them suitable for a range of spaces, ensuring that homeowners can enjoy efficient heating without sacrificing valuable room space.

In conclusion, the Lennox Hearth EBSTPM-2 and EBSTNM-2 are exemplary models that combine innovative technology, safety, and eco-friendliness. Their ability to provide consistent and efficient heat makes them ideal choices for homeowners looking to enhance their comfort while also being mindful of energy consumption and the environment.
Top Page Image Contents