Important Note

CAUTION

INSTALL ONLY WHEN THE FIREPLACE IS OFF AND COLD!

Merit, Merit Plus or Elite Gas Fireplaces -

Converting louvered fireplace to louvered or clean face to louvered-

Step 1. Remove the protective plastic covering from the louver assem- blies.

Step 2. Grasp the existing top radiant panel / hood assembly or louver as- semby and slightly lift and pull it forward away from the fireplace. See Figure 3 for radiant panel assembly and Figure 2 for Louvered assembly.

Step 3.Hang the replacement top louver assembly in the opening.

Step 4.Slide the existing hood into the slots on the lower edge of the cabinet top flange. See Figure 2.

Step 5.Open the bottom radiant panel or louver assembly by pushing in simultaneously the left and right sides of the panel or assembly. (The radiant panel or assembly is hinged at the bottom).

Step 6. Merit Models - Remove the assembly from the fireplace by removing the hinge screw and spacer at each end.

Merit Plus or ELite Models - Remove the bottom radiant panel or louver assembly from the fireplace by sliding the hinge pin, located at the radiant panel’s left side, to the right until it disengages from the left corner post hole. Pull the door diagonally to the left, away from the fireplace. Note: Reverse the use of the words “left” and “right” for EDCR models.

Step 7. Snap the replacement nameplate logo into the 2 holes provided in the replacement louver assembly. Note: This is not applicable to the short panel of the EDPF, EDCR, EDCL models.

Step 8. Merit Models - Install the replacement bottom louver assembly using the existing hinge screws and spacers.

Merit Plus or ELite Models - Install the replacement bottom louver assembly by inserting the right side locating pin into the right cabinet corner post and then the left side spring-loaded pin into the left cabinet corner post. Note: Reverse the use of the words “left” and “right” for EDCR models.

(Polished Brass & Brushed Stainless Kits Only): The finish on the polished brass and brushed stainless louvers will require heat to harden and cure (after approximately 3 fires, the finish will be completely cured). Prior to burning this appliance, the polished brass and brushed stainless surfaces should be cleaned thoroughly with a good window cleaning solution and a soft cloth. Do not use any metal polishes or abrasives to clean the surfaces. Any oils or fingerprints left on the finish during the curing process may become permanent blemishes.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products. Consult your local distributor for fireplace code information.

P/N 750,119M REV. B 03/2008

1110 West Taft Avenue • Orange, CA 92865

3-Piece Louver Kit specifications

The Lennox Hearth 3-Piece Louver Kit is a sophisticated accessory designed to enhance the aesthetic and functional aspects of your fireplace. This louver kit offers a seamless integration with Lennox fireplaces, making it a popular choice among homeowners looking to elevate their heating appliances.

One of the main features of the Lennox Hearth 3-Piece Louver Kit is its exceptional craftsmanship. The kit is designed with precision-engineered components that ensure a perfect fit and installation. The three-piece design provides flexibility in installation and styling options, allowing homeowners to customize the look of their fireplace to match their home’s décor.

The louver kit is crafted from durable materials that not only guarantee longevity but also resist rust and wear over time. This durability ensures that the louver kit maintains its visual appeal and functionality, no matter the wear and tear encountered in everyday use. Additionally, the louver kit is available in various finishes, allowing for a perfect match with existing fireplace designs or surrounding décor.

In terms of technologies, the Lennox Hearth 3-Piece Louver Kit incorporates innovative design elements that enhance airflow and efficiency. The louvers are designed to optimize the distribution of heat throughout the living space, ensuring that warmth is effectively circulated during operation. This feature not only contributes to the overall comfort of a home but also increases the heating efficiency of the fireplace.

Another important characteristic of the louver kit is its ease of installation and maintenance. The kit is packaged with clearly outlined instructions, allowing even novice DIY enthusiasts to install it without professional help. Maintenance is a breeze, as the materials used are easy to clean and require minimal upkeep to maintain their appearance.

In summary, the Lennox Hearth 3-Piece Louver Kit is a versatile and stylish addition to any Lennox fireplace. With its durable materials, innovative design, and customizable options, it enhances both the aesthetics and functionality of your fireplace, making it a great investment for comfort and style in your home.