Trane FTXS15DVJU, FTXS18DVJU To 3-D Airflow, To cancel 3-D Airflow, Three-Dimensional 3-D Airflow

■To 3-D Airflow

1. 3. Press the “SWING button ” and the “SWING button ”:

the “ ” and “ ” display will light up and the flap and louvers will move in turn.

■To cancel 3-D Airflow

2.4. Press either the “SWING button ” or the “SWING button ”

Notes on louvers angles

■ATTENTION

•Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is rotating at a high speed and may cause bodily injury if fan comes in contact with fingers.

Notes on flap angle

•When “SWING button” is selected, the flaps swinging range depends on the operation mode. (See the figure.)

Three-Dimensional (3-D) Airflow

•Using three-dimensional airflow circulates cold air, which tends to collected at the bottom of the room, and hot air, which tends to collect near the ceiling, throughout the room, preventing areas of cold and hot developing.

■ATTENTION

•Always use a remote controller to adjust the flaps angle. If you attempt to move it forcibly with hand when it is swinging, the mechanism may be broken.

•Be careful when adjusting the louvers. Inside the air outlet, fan is rotating at a high speed and may cause bodily injury if fan comes in contact with fingers.

In COOL or DRY mode

STOP

COOL

approx. 10˚~40˚

DRY approx. 5˚~35˚

In HEAT or FAN mode

STOP

HEAT

approx. 15˚~55˚

FAN approx. 5˚~55˚

13