Cleaning the Lifetime Hepa Permanent Filter

Removing/Changing the Filters (continued)

Step 4: Remove the filter assembly (consisting of the HEPA filter and pre-filter) from the internal chamber.

Step 5: Locate the seam of the pre-filter and carefully separate the fastener to remove the pre-filter from the HEPA filter (Fig. 3).

Step 6: Discard used pre-filter if necessary. Clean the HEPA filter if necessary.

Step 7: Carefully wrap the pre-filter around the HEPA filter so that the ends meet (Fig. 4). Fasten the ends together with the fastener provided.

Step 8: Place the whole filter assembly into the internal chamber. Close the product by replacing the base and tightening the locking mechanism.

Step 9: Turn the air purifier into an upright position, plug into a wall outlet and it is ready for operation.

Cleaning the Lifetime HEPA™ Permanent Filter*

The LifeTime HEPA™ Filter is vacuum-able and should be cleaned regularly for optimum performance.

To Clean the HEPA Filter:

•DO NOT USE WATER OR OTHER LIQUIDS TO CLEAN THE HEPA FILTER.

•Turn the air purifier OFF and unplug from the wall outlet.

Fig 5

•After removing the filter assembly from the air purifier (refer to section “Removing/Changing the Filters” in this

manual), separate and remove the carbon pre-filter from the HEPA filter and place aside (or discard if pre-filter needs replacement).

• To vacuum-clean the filter, hold the filter and run a vacuum cleaner with a nozzle or brush attachment along the filter to pick-up the dirt and particles (Fig.5). Repeat along the entire surface of the HEPA filter.

•Do not penetrate the HEPA paper pleats with the

vacuum attachment since tearing or puncturing can occur.

•Note that the filter may still be discolored even after cleaning it. This is acceptable and will not affect performance. Also, do not be concerned if you still see particles attached to the HEPA filter. The filter performance is still optimal.

•After vacuuming the filter, wrap the pre-filter around the HEPA filter and place the whole assembly back into the internal chamber of the air purifier (see “Removing/Changing the Filters”).

•You now need to reset the Intelli-Check™Filter Indicator. With the air purifier powered on, press and hold the appropriate filter indicator button for approximately 10 seconds until the light turns off (see Fig. 1).

If the HEPA filter clogs or if you have difficulty cleaning the filter, please visit us at www.kaz.com or call us at 1-800-332-1110.

*Permanent filter life based on ordinary use and care.

50150, 50250, 50300, 50200, 50100 specifications

Honeywell's 50000 series of products, including models 50300, 50100, 50250, 50200, and 50150, represent a significant advancement in the field of security and safety solutions for both residential and commercial applications. Each model comes equipped with robust features and technologies that cater to diverse user needs, enhancing monitoring and control capabilities.

The Honeywell 50300 is known for its high-capacity monitoring capabilities. It offers an array of three different communication paths, including IP, cellular, and Wi-Fi, ensuring that users have multiple options for connectivity. Its broad compatibility with existing security systems allows for seamless integration, making it a favored choice among security professionals.

The 50100 model stands out for its highly sophisticated automation features. Users can take advantage of smart home integrations that allow control over various home devices from a single interface. The inclusion of voice control capabilities sets this model apart, making it user-friendly and innovative. The intuitive design is complemented by a responsive touchscreen interface that simplifies navigation through different settings and options.

The 50250 model is tailored for those requiring advanced video surveillance features. With support for high-definition video feeds, users can access real-time footage through their mobile devices. This model is perfect for environments where visual monitoring is critical, such as retail and corporate spaces. The enhanced night vision technology ensures clear images in low-light conditions, delivering reliable security around the clock.

The Honeywell 50200 strikes a balance between performance and affordability. It is designed for small to medium-sized businesses, offering essential features without compromising on quality. Built-in analytics allow for efficient monitoring, helping users to spot unusual patterns or activities quickly. The model's versatility ensures it can adapt to various installation environments and specific security requirements.

Lastly, the 50150 model is ideal for users seeking integration with third-party services. It offers API access for developers looking to create custom solutions, enhancing the product's functionality and adaptability. This flexibility, along with robust data analytics, positions the 50150 as a smart choice for tech-savvy users aiming to deploy comprehensive security solutions.

Together, these models from Honeywell exemplify innovation and reliability in security technology, catering to a wide range of customer needs and ensuring peace of mind across various applications.