Honeywell F111 Series 1, F111 Series 2 specifications CPZ Adsorbent Module

Page 7

F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER

IMPORTANT

Do not touch the pleated filter media. Handle only the filter frame to prevent damage to the filter media.

7.Close and latch the lid.

CPZ™ Adsorbent Module

The CPZ™ adsorbent module is used to collect gases, vapors, odors and volatile organic compounds (V.O.C.) from the air that passes through the air cleaner. Adsorbents collect and hold 25% to 50% of their weight in odorous gases and vapors. The impurities are collected until the adsorbents reach saturation. At saturation, the adsorbents emit a continuous strong pungent odor. If the air cleaner is turned off for 8 to 10 hours, there will a temporary odor when it is turned back on. If the odor persists for 30 minutes, it is time to replace the filters.

NOTE: When tobacco smoke is a contaminant, both the particle filter and the adsorbent filter will need to be serviced at the same time.

1.Slowly open the lid, supporting the lid so the filters do not fall out.

2.For Series 1 only.Support the adsorbent module with one hand and release the fastener.

3.For Series 2 only.Support the adsorbent module with one hand and turn open the catches

4.Use two hands and slide the filter from the housing.

IMPORTANT

The module weighs about 26 lb (12 kg) and can be hard to handle.

5.Place the spent module in a plastic trash bag and dispose of properly.

6.Remove CPZ™ sorbent modules from their packaging and install. Be sure the fastener tabs (3) are facing downward and fastened.

7.For Series 1 only. Be sure the fastener tabs are facing downward and fasten them.

8.For Series 2 only.Be sure both catches are turned down and filter rests firmly on catches.

9.Close and latch the lid.

NOTE: On initial startup, a small amount of dust can blow from the air cleaner. This is normal and stops a few minutes after startup. The start-up filters will catch all the dust. The startup-filters are placed in the two exits outlets on the grill. After running the unit for 5 minutes, turn off the unit. Remove and discard the two start-up filters.

7

68-0198EF-4 Rev. 11-07

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Contents FeaturesApplication Most Gases SpecificationsInstallation Weight Ordering InformationChoose Location Planning the InstallationFor Use In Fire Resistance Rated Construction When Installing this Product… InstallationOpening/Closing the Lid Lid AssemblyRemoving /Replacing the Lid Particle Filter ServiceOperation PrefilterModule weighs about 26 lb 12 kg and can be hard to handle CPZ Adsorbent ModuleNot shown in Fig Parts ListM11995E Air-Pure Systems, Inc Limited TWO-YEAR Warranty

F111 Series 2, F111 Series 1 specifications

The Honeywell F111 Series 1 and Series 2 are advanced control systems designed for various aerospace applications, instrumental in enhancing operational efficiency and reliability in flight management. Renowned for their pioneering technologies, these systems are created to meet the growing demands of modern aviation.

The F111 Series 1 features a robust architecture that integrates diverse avionics, ensuring compatibility and interoperability with existing aircraft systems. This series employs state-of-the-art signal processing techniques, allowing for enhanced data interpretation from onboard sensors. Pilots benefit from real-time information displays, granting them better situational awareness during flights. The control algorithms that govern autopilot functions are precisely tuned, yielding smoother transitions during manual and automatic flying.

On the other hand, the F111 Series 2 builds upon its predecessor's foundation, introducing several enhancements. One of its key features is an upgraded user interface, which simplifies pilot interaction and reduces cognitive workload. The Series 2 includes advanced predictive maintenance capabilities, offering real-time diagnostics that help anticipate issues before they escalate, significantly reducing downtime and maintenance costs.

Both series utilize cutting-edge technologies such as digital signal processors and integrated circuit designs, which improve reliability while minimizing weight—an essential factor in aircraft design. The systems are also designed for ruggedness, ensuring they can withstand the harsh environments encountered in aviation. Additionally, they incorporate safety measures like redundancy protocols and fail-safe mechanisms to enhance flight security.

The communication capabilities of both F111 series are noteworthy; they are equipped with modern data links that facilitate seamless connectivity with ground control and other aircraft. This feature enhances coordination in cooperative operations, making them ideal for military and commercial applications alike.

In summary, the Honeywell F111 Series 1 and Series 2 represent a significant advancement in avionics technology. With their intelligent design, robust features, and focus on safety and efficiency, these systems are at the forefront of modern aviation, ensuring pilots have the tools they need for successful flight operations while minimizing operational risks. Their continual evolution reflects the commitment to meeting the dynamic challenges of the aerospace industry.
Top Page Image Contents