Honeywell 2077D manual Checking Batteries, English Appropriate Use Your Safe, Troubleshooting

Checking Batteries

On the digital keypad, press the “B” button.

•If the red LED light flashes, change the batteries within 2 months.

•If no LED lights, change the batteries immediately.

Changing Batteries

Changing batteries will not erase your personal code.

1.Open the safe door using your personal code and locate the battery compartment on the lower inside portion of the door.

2.Push in on the left side of the cover and remove by sliding to the right (Fig. 6)

3.Carefully replace the batteries (4 -”AA”) using the positioning guide printed on the inside of the battery compartment.

4.Replace the cover by sliding back into position.

English

Appropriate Use of

Your Safe

•Your Anti-Theft safe is designed to provide protection against theft and minimal fire damage. It does not protect the contents from serious fire or water damage.

•For information on safes that provide protection from fire and water damage, see your Home Security retailer or visit our website at www.honeywellsafes.com

Troubleshooting

•Safe will not open with your personal code:

Open the safe using the override key and re-program your code.

•No LED Lights:

Remove the override lock cover and open safe with the override key. Refer to checking/changing batteries.

If you continue to experience problems or have questions regarding your safe, please contact Sisco customer service at 800-223-8566. Do not return safe to the retailer unless instructed to do so by Customer Service Representative.

Thank you!

4