Installation Notes, Step | Zephyr AK9800, AK6000, AK2000 specs

INSTALLATION

INSTALLATION NOTES

Step 6:

A damper (not included) should be installed to prevent back-draft where needed. A damper might also be required local codes in order to qualify for building inspections. You can purchase dampers from most hardware stores, or call our service line to order.

When a damper is not installed, a starting collar is provided in order to increase and raise the duct opening clearance above the cabinet's base. Snap the adaptor's smaller end to hood's duct opening and secure by drilling 2 pilot holes and fasten with screws (as shown on step 6, page 10).

Step 9:

The hood should NEVER be installed so that the front is tilting downward. This will cause grease to back flow to the front instead of the rear. ALWAYS level the hood or slightly tilt front of hood upward. Some models includes 2 pre- installed bumpers on the rear (or top) to aid the hood front tilt upward when installed. Remove the bumpers simply by peeling off if hood is preferred to be installed leveled. (refer diagram)

Step 12:

A connector locking the electrical wiring on the electrical box is recommended and might be required by local codes. Check with local inspectors, purchase and install the appropriate connector in order to meet all mandatory codes. Call our service line to order connector.

Wall

Rear

Front

AK9800, AK6000, AK2000 specifications

Zephyr's AK series, which includes the AK6000, AK9800, and AK2000 models, represents a significant leap in technology and design for industrial and commercial applications. These advanced systems are tailored to cater to the needs of various industries, from manufacturing to logistics, ensuring efficiency and reliability.

The AK6000 is known for its versatile capabilities and compact design. It features a powerful processing unit that allows for real-time data analytics, enhancing operational performance. The unit is integrated with a user-friendly interface, making it accessible for operators of all skill levels. Equipped with advanced sensors, the AK6000 can monitor environmental conditions, ensuring optimal performance in diverse working conditions. Additionally, its low energy consumption makes it eco-friendly and cost-effective, appealing to businesses looking to reduce their carbon footprint without compromising efficiency.

The AK9800, on the other hand, is designed for heavy-duty operations. Its robust construction and high-performance capabilities make it ideal for demanding environments. With an increased load capacity and state-of-the-art automation features, the AK9800 is perfect for high-volume production lines. It boasts compatibility with various software platforms, allowing for seamless integration into existing systems. The model operates with enhanced safety protocols, including advanced obstacle detection and emergency stop mechanisms, ensuring operator safety in busy industrial settings.

Lastly, the AK2000 stands out for its adaptability and innovative technology. This model is particularly focused on smart connectivity, allowing for easy integration with IoT applications. Its modular design means that businesses can customize their setup according to specific needs. The AK2000’s predictive maintenance features utilize AI algorithms to forecast potential issues before they arise, hence minimizing downtime and enhancing productivity. Moreover, it encompasses a cloud management system, enabling users to track performance analytics and streamline operations from any location.

In conclusion, Zephyr's AK series—comprising the AK6000, AK9800, and AK2000—offers a range of features that cater to diverse industrial needs. With their advanced technologies, user-friendly designs, and emphasis on safety and energy efficiency, these models are set to redefine standards in the industry, driving businesses towards enhanced productivity and sustainability.