White Rodgers 1F95-391 specifications Description, Specifications, Precautions, Electrical Data

Page 1

INSTALLATION

DESCRIPTION

This White-Rodgers Digital Thermostat uses microcomputer technology to provide precise time, humidity, and temperature control. This thermostat offers the flexibility to design

SPECIFICATIONS

1F95-391 : 7 Day programming; residen- tial applications.

ELECTRICAL DATA

Electrical Rating:

20 to 30 VAC, 50/60 Hz with common

0.05to 1.5 Amps per terminal

2.5Amps maximum total load (all terminals combined).

Hardwired only.

C terminal is required.

WHITE-RODGERS 90 SERIES

1F95-391

MULTI-STAGE/HEAT PUMP INSTALLATION/CONFIGURATION

heating

and cooling programs that fit

stage or heat pump systems with electric or

building needs. This thermostat is adaptable

fossil fuel auxiliary.

to most

24 volt residential forced air multi-

 

Standard Systems:

Operating Ambient Temperature:

Multi-stage gas, oil, electric.

32 ° to 110

° F (0 ° to 43 ° C)

Single-stage or two-stage compressor

Operating Humidity Range:

heat pump.

90% non-condensing max.

THERMAL DATA

Shipping Temperature Range:

Setpoint Temperature Range:

-4 ° to 149

° F (-20 ° to 65 ° C)

 

 

45 ° to 99 ° F (7 ° to 37 ° C)

PRECAUTIONS

!WARNING

Do not short out terminals on gas valve or primary control to test. Short or incorrect wiring will damage thermostat

and could cause personal injury and/or property damage.

Do not use on circuits exceeding specified voltage. Higher voltage will damage thermostat and could cause shock or fire hazard.

Thermostat installation and all compo- nents of the system shall conform to Class II circuits per the NEC code.

!CAUTION

To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.

NOTE

Read all instructions thoroughly before beginning installation.

This thermostat is intended for use with a low voltage system. Do not use on a line voltage system.

White-Rodgers is a division of Emerson Electric Co.

www.white-rodgers.com

Do not exceed ratings shown in the Specifi- cations section, above. If in doubt about the electrical ratings of your heating/cooling system, have it inspected by a qualified heating and air conditioning contractor or licensed electrician.

All wiring must conform to local and national electrical codes and ordinances.

This control is a precision instrument, and should be handled carefully. Rough handling or distorting components could cause the control to malfunction.

Part No. 37-6527B

Replaces 37-6527A

0443

Image 1
Contents Precautions SpecificationsDescription Electrical DataConfiguring and PROGRAM- Ming InstallationRemove OLD Thermostat Attach Base to WallConfiguration CONFIGURATIONsection for proper thermostat configurationMULTI-STAGE Terminal Outputs Heat Pump Terminal OutputsReset Switch SwitchesE2/P Switch DHM Terminal Function DHMInstaller Configuration Comments Installer TableFirmly Press SET TimeBalance Point Temperature Compressor OFF DelayDisabling Automatic Changeover Mode Balance PointService Service ReminderOFF CommentsCheck Thermostat Operation TroubleshootingNarrow or wide temperature swing Common ProblemsNo Heat/No Cool/No Fan No HeatWhy does the system run with Thermostat Setting and ThermostatSetpoint and room temperature Why is the temperature change

1F95-391 specifications

The White Rodgers 1F95-391 is an advanced thermostat that stands out in the market for its user-friendly design, superior functionality, and energy-saving capabilities. Specifically tailored for both residential and light commercial applications, this programmable device is engineered to provide optimal climate control while enhancing energy efficiency.

One of the key features of the 1F95-391 is its large, easy-to-read display. The backlit LCD screen allows for simple navigation even in low-light conditions, ensuring you can adjust the temperature settings with ease. The interface is intuitive, allowing users to quickly familiarize themselves with its functionalities.

This thermostat supports a wide range of heating and cooling systems, making it versatile for various setups, including gas, oil, and electric systems. Its compatibility with both single-stage and multi-stage heating and cooling systems further aids in its adaptability, catering to different home environments.

Energy conservation is a hallmark of the 1F95-391. The programmable scheduling allows users to create customized temperature settings that align with their daily routines. This feature can significantly reduce energy consumption by allowing the system to operate at lower settings when occupants are away or sleeping, leading to substantial cost savings on utility bills over time.

The 1F95-391 also integrates advanced technologies such as Adaptive Intelligent Recovery, which learns how long it takes to reach the desired temperature and adjusts the heating or cooling accordingly. This means that the home maintains comfort while optimizing energy use, eliminating the need for excessive manual adjustments.

Moreover, the thermostat's filter change reminder ensures that users are alerted when it's time to replace or clean the HVAC filter. This feature not only helps maintain the air quality in the home but also extends the lifespan of the HVAC system by ensuring it operates efficiently.

In addition to its operational features, the White Rodgers 1F95-391 boasts reliability and durability. Constructed with high-quality materials, it is designed to withstand the test of time and provide consistent performance, making it a sound investment for any property owner.

Overall, the White Rodgers 1F95-391 represents a significant advancement in smart temperature control, combining functionality, efficiency, and ease of use. Whether upgrading an existing thermostat or installing a new one, consumers can expect enhanced comfort and reduced energy costs.