De-icer control
Product Damage Hazard
Do not operate dehumidifier at tem- peratures below 65°F (18.3%).
Failure to follow the above precaution could result in the coils icing over and the unit not operating properly.
Your Whirlpool dehumidifier is equipped with a feature to help you get the most comfort from your new appliance by permitting it to operate down to 65°F (18.3%). If your dehumidifier runs when room temperature and humidity conditions are low, frost can form on its evaporator coil. This interferes with proper operation.
The
Adjusting the water level control lever
The Water Level Adjustment can be set in two positions to turn off the unit automati- cally when the pan is full. This prevents the danger of overflow.
Pan must be in proper position for Water Level Control Switch to work. The Water Level Control Switch will automatically turn off the dehumidifier at the fill level you selected when pan is properly placed. Loosen the screw to move the Water Level Control Lever. Retighten screw when adjusted to desired setting.
NORMAL fill position
Set Water Level Control Lever to the inden- tation on the left side. The water pan and water will weigh approximately 16 Ibs.
(7.2 kg) and water pan will be l/2 full.
MAXIMUM fill position
Set Water Level Control Lever to the raised area on the right side. The water pan and water will weigh approximately 24 Ibs.
(10.8 kg) and water pan will be %I full.
Water level
Normal | Sciew | ~Maximum |
fill position |
| fill position |