7 SEAT AND ARMS

7.4Adjusting the Arm Width

For this procedure, refer to FIGURE 7.4 on page 32.

When installing the arms during set up, the four mounting screws are installed on the seat hinge for shipping purposes.

Lynx L-3 shown. Lynx L-4 adjusts the same way.

Arm

1.Loosen the knob securing the arm tube to the seat frame.

2.Push the arm in or out to the desired position.

Seat

Frame

Knob

Arm

Tube

7.5Replacing Armrest Pads

For this procedure, refer to FIGURE 7.5.

1.Remove the two mounting screws that secure the armrest pad to arm.

2.Remove the old armrest pad.

3.Install new armrest pad and securely tighten with existing mounting screws.

4.If necessary, repeat STEPS 1-3 to replace the other armrest pad.

FIGURE 7.4

Mounting

FIGURE 7.5

Adjusting the Arm Width

Arm Pad

Arm

Replacing Armrest Pads

Invacare® Lynx™ L-3& Invacare® Lynx™ L-4 Scooters

32

Part No. 1143205

Page 32
Image 32
Invacare L-4, L-3 user manual Adjusting the Arm Width, Replacing Armrest Pads