Invacare L-4, L-3 user manual Accessories, Installing/Removing the Accessory Tube

12 ACCESSORIES

12 Accessories

WARNING

￿ After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustment or service, turn power off and remove key from ignition.

The crutch/cane holder, safety flag, rear mounted basket and oxygen holder all install into the accessory tubes; ONLY one of these may be installed at a time.

12.1Installing/Removing the Accessory Tube

For this procedure, refer to FIGURE 12.1.

Installing

1.Position the accessory tube onto the seat frame.

2.Secure the accessory tube to the seat frame using the mounting screw (Detail “A”).

3.Remove the mounting knob from the accessory tube.

4.Remove the cap from the accessory tube.

Removing

1.Remove the mounting screw securing the accessory tube to the seat frame.

2.Remove the accessory tube from the seat frame.

Mounting Screw DETAIL “A”

Installs HERE

Cap

Mounting Knob

Accessory Tube Mounts to the Seat Frame HERE

FIGURE 12.1 Installing/Removing the Accessory Tube

Invacare® Lynx™ L-3& Invacare® Lynx™ L-4 Scooters 46 Part No. 1143205