12 ACCESSORIES

12.5 Installing/Removing the Rear Mounted Basket

￿

Installing

WARNING

The rear mounted basket is rated for a maximum capacity of ten lbs.

After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely.

The installation of the basket and basket bracket onto the back of the scooter seat increases the length of the scooter. When turning the scooter or swiveling the scooter seat, it is important to take note of this increased length - otherwise, injury and/or damage to surrounding property may occur.

For this procedure, refer to FIGURE 12.5.

1.

Loosen but DO NOT remove the mounting knob.

 

Accessory

2.

Install the basket bracket into the accessory tube.

 

Tube

3.

Thread the mounting knob into the welded nut on the accessory

 

Mounting

 

tube. Securely tighten.

 

Knob

4.

Align the mounting clips on the bracket with the slots on the basket

 

Rear Basket

 

and slide the basket down securely into position.

 

Mounting Clips

Removing

 

Insert Into

1.

Remove the basket from the bracket.

Slots

Accessory

Tube

2.

Loosen the mounting knob.

 

 

 

3. Remove the basket bracket from the accessory tube.

4.Tighten the mounting knob.

 

 

Basket Bracket

 

 

FIGURE 12.5 Installing/Removing the Rear Mounted Basket

Invacare® Lynx™ L-3& Invacare® Lynx™ L-4 Scooters

50

Part No. 1143205

Page 50
Image 50
Invacare L-4, L-3 user manual Installing/Removing the Rear Mounted Basket