Logitech DLA2RF manual Zone 2 Output of an A/V or Stereo Receiver, A/V Receiver Zone 2 Application

DLA2RF 2 Room Speaker Selector

Zone 2 Output of an A/V or Stereo Receiver

Certain A/V Receivers and Stereo Receivers have a Zone 2 feature that allows them to play a seperate source to a second zone. Figure 2-2shows the Zone 2 speaker outputs of an A/V receiver connected to to the AMPLIFIER INPUT of the DLA2RF. Like the previous example, a pair of speakers are connected to the DLA2RF’s Room 1 Speaker Outputs, while an additional pair of speakers is connected to the Room 2 Speaker Outputs. The RF RECEIVER BASE is connected to the ATON PORT. This application allows the A/V receiver’s Main speakers to play in the room in which the receiver is located, while two additional pairs of speakers play in other areas of the home-each controlled by the RF remote included with the DLA2RF. This is a multi-source application: the Main speakers may play one source, while Zone 2 (the DLA2RF loactions) plays a different source.

Note: Set the Zone 2 volume level to the point where it achieves the maximum listenable level (prior to distortion). The DLA2RF’s volume level will adjust up to this maximum level.

PS3		RF
		Base
POWER
SUPPLY
PATENT	AMPLIFIER	IR EMITTER
	INPUT	OUTPUTS
PENDING		ATON
PWR IN		PORT
12VDC / 2.1A
	CLASS 2 WIRING	1
Speaker		Speaker
Cables		Cables

L RL R

+

-

ZONE 1 ZONE 2

A/V Reciever

Zone 2

Speaker Outputs

Room 1	Room 2
Speakers	Speakers

Figure 2-2: A/V Receiver Zone 2 Application

8 ©2007 • All rights reserved.