Logitech DLA2RF manual Scene Presets, Setting a Scene

Page 19

DLA2RF 2 Room Speaker Selector

ROOM 1	ROOM 2
Press	Press
& Hold	& Hold

5.After 3 seconds the Default Volume Level is saved.

6.Room LED and Volume LED’s blink four times (Room LED blinks RED).

7.The Room will turn back on to the volume level it was set to prior to setting the Default Volume Level.

8.Turn the Room Off, then back On to achieve the Default Volume Level.

Note: Setting the Default Volume level to the maximum volume level will essentially dis- able Default Volume (the room will always come back on at the last volume level prior to turning the room Off).

Scene Presets

Setting a Scene

A Scene Preset allows the volume level for each room to be saved and then recalled at any time with the press of a button.

To set a Scene Preset:

1.Set the volume in each room to the desired level.

Note: Any room whose LED is not lit (red or blue) or any room whose volume is set to “0” will be considered OFF when setting a Scene.

2.Press and hold the ALL ON/OFF Button for three seconds.

ROOM 1

ROOM 2

Press

& Hold

3.Once the Scene Preset has been saved, the Room LEDs for the rooms included in the Scene Preset will blink on and off four times and the system will return to the levels prior to setting the Scene Preset.

Note: If a Room LED does NOT blink, it will not be activated when a Scene is selected.

© 2007 • All rights reserved.

17

Image 19

Contents DLA2RF Page Package Contents Safety InformationContents Introduction Aton DLA2RF Accessories FeaturesFront Panel Indicator/Button FunctionConector Function Rear PanelStandard Audio/Video or Stereo Receiver System Design OverviewA/V Receiver Zone 2 Application Zone 2 Output of an A/V or Stereo ReceiverDLA2RF External AmpliﬁerProcessor/Pre-Amp Ampliﬁer Application Amplifier Input ConnectionsImportant Note PWR in Connection Aton PORT/RF Receiver Volume Status Bar Settings & Operation Volume Settings Receiver/Ampliﬁer Volume SettingsRoom Volume Adjustment Press Default VolumeSetting a Scene Scene PresetsRecalling a Scene Preset Button Function RF Remote ControlAudio Symptom Possible Cause Solution TroubleshootingRF Control Symptom Possible Cause Solution RF Remote/Receiver Base Appendix a SpecificationsDimensions ConnectionsFigure B-1 Room Identiﬁcation Labels Appendix B Room Identification LabelsDLA2RF 2 Room Speaker Selector Limited Warranty Page Selector de Altavoces De 2 Cuartos Page Contenidos del paquete Visión de conjunto del diseño del sistema ÍndiceIntroducción Accesorios de Aton DLA2RF CaracterísticasIndicador/Botón Función Panel FrontalConector Función Panel PosteriorReceptor Audio /Vídeo o Receptor Estéreo Convencionales Visión de conjunto del diseño del sistemaSalidas en «Zone 2» de un Receptor A/V o Receptor Estéreo Ampliﬁcador Externo Dibujo 2-4 Aplicación de Ampliﬁcador Procesador/Pre-amp Entrada del Ampliﬁcador «AMPLIFER INPUT» ConexionesLas Salidas del Emisor IR «IR Emitter OUTPUTS» Salidas de Altavoces «SPEAKER OUTPUTS»La Conexión de «PWR IN» Puerto ATON/Receptor RF «ATON PORT/RF Receiver»Ajustes y Operación Ajustes de VolumenAjustes de Volumen de Receptor/Ampliﬁcador Pantalla para monitoreo del nivel del volumenAjuste de Volumen del Cuarto «ALL ON/OFF» Botón de encender/apagar todo Volumen PreseleccionadoPara Preseleccionar una Escena Escenas PreseleccionadasReestablecer una escena preseleccionada Botón Función Control Remoto RFAudio Síntoma Causa Posible Solución Problemas y SolucionesControl Remoto RF Síntoma Causa Posible Solución Síntoma Causa Posible SoluciónSíntoma Causa Posible Solución Control Remoto RF/Base del Receptor DimensionesApéndice a Especificaciones ConexionesDibujo B1 Etiquetas de identiﬁcación del cuarto Apéndice B Etiquetas de identificación del cuartoPage 9900879 Reva Garantía limitadaFolding Album Fold Center Staple