Kicker KX.4 Series manual Performance, Model, Specifications of KX200.4

Page 10

Specification

Performance

MODEL	KX200.4

RMS Power in Watts, All Channels Driven
@ 14.4V, 4Ω Stereo, < 1% THD+N	4 x 35
@ 2Ω Stereo, < 1% THD+N	4 x 50
@ 4Ω Mono, < 1% THD+N	2 x 100
@ 12.5V, 4Ω Stereo, 0.085% THD+N	4 x 25
@ 2Ω Stereo, 0.5% THD+N	4 x 40
@ 4Ω Mono, 0.5% THD+N	2 x 80
Length with EndKaps:	11.84”
	(30.07cm)

Specifications of KX200.4

Height:	2.5 inches / 6.35 centimeters
Width:	10.125 inches / 25.7 centimeters
Frequency Response:	20Hz - 20kHz, +/- 0.5dB
Input Sensitivity:	170mV - 5V low level, 340mV -
	10V high level
Signal-to-Noise Ratio:	>95dB, a-weighted, re: rated power
Electronic Crossover:	High Pass, Low Pass or Bypass,
	Fixed @ 80Hz, 12dB/octave
KickBass Boost:	Variable 0 to +12dB boost @ 40Hz

Model KX200.4

35 x 4 @ 4 ohms, 14.4Vdc, 1% THD, CEA-2006 (Watts)

Signal to Noise Ratio -85

CEA-2006 (ref: 1W, A-weighted)

10	KX Amplifier

Image 10

Contents Page KX200.4 Features Wiring MountingKX-200.4 RCA Dummy PlugsShorting Plugs Stereo And Bridged System DiagramStereo Four Channel Operation Bridged Operation Mono Crossover Control Navigation Bass Boost LED is GREEN, no output Trouble shootingLED off, no output With a Volt Ohm Meter VOM check LED is RED, no outputAlternator noise whining sound that varies with engine RPM Poor stereo image or reduced bass responseModel Specifications of KX200.4Performance KX200.4What is not COVERED?