Using the exhaust vent control

The Exhaust Vent Control draws stale or smoky air from the mom or circulates existing room air.

To exhaust room alr:

1.Set Exhaust Vent Control to OPEN.

2.Set Selector Control to desired setting (COOL, HEAT, or FAN ONLY).

3.Set Fan Control to desired setting (ENERGY SAVER or NORMAL FAN).

4.Set Thermostat Control to desired setting.

To circulate room air:

1.Set Exhaust Vent Control to CLOSED.

2.Set Selector Control to desired setting (COOL, HEAT, or FAN ONLY).

3.Set Fan Control to desired setting (ENERGY SAVER or NORMAL FAN).

4.Set Thermostat Control to desired setting.

NOTE: For maximum performance, the Exhaust Vent Control must be in the CLOSED position when cooling or room air circulation is desired.

Changing air directiol

The air direction cartridges on both sides of the unit control the direction of the cooled air. The air direction cartridge rotates to direct the air straight ahead or to the sides of the unit. The louvers in each air direction cartridge are operated by a tab. Use the tab to direct the air up, down, or straight ahead.