Whirlpool ACH082XD0 warranty Caring for Your Air Conditioner, Cleaning the front panel

Page 7

Caring for Your Air Conditioner

Proper care of your air conditioner helps ensure longer life of the unit and lower operating c&ts. Follow these instructions carefully .

Electrical Shock Hazard

l Unplug the power cord from the recep- tacle before cleaning the unit.

l Do not use cleaning fluids, solvents, abrasive cleaners, or strong detergents on the air conditioner.

Failure to follow the above precautions could result in electrical shock, personal injury, or product damage.

Cleaning the front panel

1.Disconnect power cord from receptacle.

2.Remove the front panel for cleaning. Remove the two screws from the bottom edge of the front panel.

3.Lii front panel up and toward you.

4.Remove the slide-out air filter and clean

separately.

(See “Cleaning the slide-out

a

air filter” on

page 8.)

0

NOTE: The front panel does not have to

Screws

be removed to clean filter.

 

5.Clean front panel with warm water, mild soap or detergent, and a soft cloth. Rinse and dry thoroughly.

6.Wipe control panel clean with a soft, dry cloth.

7.Replace the front panel.

8.Plug in the power cord.

7

Image 7
Contents Caring for Your Air Conditioner Troubleshooting Requesting AssistancePlease record your model’s information Thank you for buying a Whirlpool@ applianceHelp us help you SafetyYour safety is important to us Air ConditionerParts and Features Electrical Shock Hazard Using the energy saver settingsOperating Your Air Conditioner Starting your air conditionerTo circulate room air Using the exhaust vent controlChanging air directiol To exhaust room alrCaring for Your Air Conditioner Cleaning the front panelPerforming annual maintenance Cleaning the slide-outAir filter Saving energy Air conditioner TroubleshootingProblem Normal operating soundsIf you need assistance If you need serviceIf you are not satisfied with how the problem was solved Requesting Assistance or SetiiceIndex WHIRLPOOL@ Warranty