Whirlpool ACE082XR0 Electrical Requirements, Through-the-wall installation, Power Supply Cord

Page 4

Through-the-wall installation

The wall opening measurements should be:

■Height: 16" (40.6 cm) plus twice the thickness of wood used to build frame.

■Width: 22⁵⁄₈" (57.5 cm) plus twice the thickness of wood used to build frame.

■Depth: 2¹⁄₂" (6.4 cm) minimum to 8" (20.3 cm) maximum.

C

A

B

D

C

A. 16" (40.6 cm)

C. Wood thickness

B. 22⁵⁄₈" (57.5 cm)

D. 2¹⁄₂" (6.4 cm) minimum to

 

8" (20.3 cm) maximum

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Ground wire must be connected to ground screw located in lower right corner of air conditioner when air conditioner is in cabinet.

The electrical ratings for your air conditioner are listed on the model and serial number label. The model and serial number label is located behind the front panel on the front flange above the coil area.

Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply cord.

Power supply

 

cord

Wiring requirements

 

■ 115-volt (103.5 min. - 126.5 max.)

 

■ 0-12 amps

 

■ 15-amp time-delay fuse or circuit breaker

 

■ Use on single outlet circuit only.

Power supply

 

cord

Wiring requirements

■230-volt (207 min. - 253 max.)

 

¹⁄₄"

 

0-12 amps

(0.6 cm)

■

 

 

 

■ 15-amp time-delay fuse or circuit breaker

 

 

 

 

 

 

 

 

 

■

Use on single outlet circuit only.

 

 

 

■230-volt (207 min. - 253 max.)

■0-16 amps

■ 20-amp time-delay fuse or circuit breaker ■ Use on single outlet circuit only.

Recommended ground method

This air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer's responsibility:

■To contact a qualified electrical installer.

■To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

Power Supply Cord

NOTE: Your unit’s device may differ from the one shown.

 

B

 

A

TEST

RESET

A. Reset button

B. Test button

This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect leakage current and power will be disconnected in a fraction of a second.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AIR Conditioner 1188080AAIR Conditioner Safety Table of ContentsÍndice Tools and Parts Installation RequirementsLocation Requirements Through-the-wall installation Power Supply CordElectrical Requirements Recommended ground methodInstallation Instructions To test your power supply cordUnpacking Remove packaging materialsInstalling Air Conditioner Back ViewBottom View Option 1-Wood, metal or plastic moldingPosition the Air Conditioner Cabinet Option 2-Plastered wall with no moldingFront View Top ViewComplete Installation AIR Conditioner USE Starting Your Air ConditionerExhaust Control on some models Style 1-Cool only air conditioner settings Fan ControlThermostat AIR Conditioner Care Troubleshooting Air conditioner blows fuses or trips circuit breakersAir conditioner seems to run too much Water drips from cabinet into your houseAssistance or Service AccessoriesPage Seguridad DEL Acondicionador DE Aire Requisitos DE InstalaciónHerramientas y piezas Herramientas necesariasPiezas suministradas en algunos modelos Requisitos de ubicaciónInstalación en la ventana en algunos modelos Método recomendado para la puesta a tierra Requisitos eléctricosCable de suministro de energía Instrucciones DE Instalación DesempaquePara poner a prueba el cable de suministro de energía Quite los materiales de empaqueInstalación del acondicionador de aire Vista posteriorInstalación en una ventana en algunos modelos Vista inferiorOpción 1-Moldura de madera, metal o plástico Colocación del gabinete del Acondicionador de aireOpción 2-Pared enyesada sin moldura Vista frontal Vista superiorComplete la instalación Cómo Usar SU Acondicionador DE Aire Cómo poner en marcha su acondicionador de aireControl de Respiradero en algunos modelos Thermostat TermostatoCómo cambiar la dirección del aire Sonidos normalesSolución DE Problemas Cuidado DE SU Acondicionador DE AireParece que el acondicionador de aire funciona excesivamente Se filtra agua del gabinete a su casaAyuda O Servicio Técnico Accesorios1188080A

ACE082XR0 specifications

The Whirlpool ACE082XR0 is a powerful and efficient air conditioning unit designed to provide optimal comfort in various indoor environments. With its sleek design and advanced technology, this air conditioner is suitable for both residential and commercial use, ensuring that you stay cool during the hottest days of the year.

One of the standout features of the Whirlpool ACE082XR0 is its energy efficiency. It comes equipped with a high EER (Energy Efficiency Ratio) rating, making it an ideal choice for those looking to reduce their electricity consumption. This model not only cools efficiently but also operates quietly, ensuring that your living or working space remains peaceful.

The unit is designed to cool spaces up to 350 square feet, perfect for bedrooms, living rooms, or small offices. Its 8,000 BTU cooling capacity enables it to rapidly lower the temperature in your space, providing immediate relief from the heat. The eco-friendly refrigerant used in this air conditioner is yet another bonus, as it contributes to reduced environmental impact while maintaining excellent cooling performance.

In terms of convenience, the Whirlpool ACE082XR0 boasts an array of user-friendly features. The intuitive electronic controls come with a remote control, allowing you to adjust the temperature and settings from anywhere in the room. It also features multiple cooling and fan speeds, giving users the flexibility to personalize their comfort. The 24-hour programmable timer is another highlight, allowing you to customize the operation schedule to match your lifestyle.

Additionally, the Whirlpool ACE082XR0 features a washable and reusable air filter, significantly extending the lifespan of the unit while ensuring that the air you breathe is clean and free of allergens. The filters are easy to access and maintain, allowing you to keep the unit in optimal working condition with minimal effort.

Installation is straightforward, making this air conditioner an attractive option for those who prefer a hassle-free setup. With its combination of performance, efficiency, and advanced features, the Whirlpool ACE082XR0 is a reliable choice for anyone looking to enhance their indoor climate control experience. Whether for temporary use during hot summer months or as a permanent fixture, this air conditioning unit meets the needs of modern users with ease and efficiency.
Top Page Image Contents