Whirlpool ACC082XR0 manual Installation Requirements, Tools and Parts, Location Requirements

Page 3
Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

Do not use an extension cord.

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

■

Flat-blade and Phillips

■

Scissors

 

screwdrivers

■

Tape measure

 

Level

■

■

Drill and ³⁄₃₂" or smaller bit

 

 

Through-the-wall installation

In addition to the tools listed above, the following tools are needed for through-the-wall installation.

■

Saw

■

1" (2.5 cm) or thicker

■

Wood preservative

 

lumber

 

#8 x ¹⁄₂" wood screws (6)

■

Caulk

■

 

 

Parts supplied (on some models)

Check that all parts are included in parts package.

 

B

A

 

C D E F

H

 

G

 

A. Foam seals (2)

E. #10 - 12 x ³⁄₈" pan-head Phillips

B. Window-lock bracket

screws (3)

C. #6 - 32 x ¹⁄₄" pan-head

F. #8 - 18 x ³⁄₈" pan-head Phillips

screws (2)

screws (6)

D. #8 x ³⁄₄" round-head

G. Top channel

screws (3)

H. Side curtains (2)

NOTE: Installation parts are supplied for double-hung windows up to 40" (101.6 cm) wide. A special Wide Window Kit is available from your dealer or service center. See “Accessories.”

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.

The location should provide:

■Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord.

■Free movement of air in room to be cooled.

■A large enough opening for the air conditioner.

■Adequate wall support for weight of air conditioner. Air conditioner weighs between 80 and 110 lbs (36.3 to 49.9 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.

A

A. Cabinet louvers

Window installation (on some models)

Window opening measurements:

■Width: 27" (68.6 cm) minimum to 40" (101.6 cm) maximum.

■Height: 16¹⁄₄" (41.3 cm) minimum.

A

B

A. 27" (68.6 cm) minimum to 40" (101.6 cm) maximum

B. 16¹⁄₄" (41.3 cm) minimum

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 1188081A AIR ConditionerTable of Contents AIR Conditioner SafetyÍndice Installation Requirements Tools and PartsLocation Requirements Recommended ground method Through-the-wall installationPower Supply Cord Electrical RequirementsRemove packaging materials Installation InstructionsTo test your power supply cord UnpackingOption 1-Wood, metal or plastic molding Installing Air ConditionerBack View Bottom ViewTop View Position the Air Conditioner CabinetOption 2-Plastered wall with no molding Front ViewComplete Installation Starting Your Air Conditioner AIR Conditioner USEFilter Monitor TemperatureMode Fan SpeedTo select the mode To change the temperature display from F to CTimer Delay To clear Timer delay programNormal Sounds To raise the temperatureTo lower the temperature Changing Air DirectionAIR Conditioner Care TroubleshootingWater drips from cabinet into your house Temperature on display does not match room temperatureAir conditioner seems to run too much Air conditioner cycles on and off too much or does not coolAccessories Assistance or ServicePage Herramientas necesarias Seguridad DEL Acondicionador DE AireRequisitos DE Instalación Herramientas y piezasRequisitos de ubicación Piezas suministradas en algunos modelosInstalación en la ventana en algunos modelos El cable eléctrico Requisitos de cableado Requisitos eléctricosMétodo recomendado para la puesta a tierra Cable de suministro de energíaInstrucciones DE Instalación DesempaquePara poner a prueba el cable de suministro de energía Vista inferior Instalación del acondicionador de aireVista posterior Instalación en una ventana en algunos modelosColocación del gabinete del Acondicionador de aire Opción 1-Moldura de madera, metal o plásticoOpción 2-Pared enyesada sin moldura Vista superior Vista frontalComplete la instalación Fan Speed Velocidad de ventilación Mode ModoCómo Usar SU Acondicionador DE Aire Cómo poner en marcha su acondicionador de aireMonitor del filtro TemperaturaPara cambiar la pantalla de la temperatura de F a C Para subir la temperatura Para ver o cambiar el tiempo restante en horasPara encender o apagar el acondicionador de aire Para seleccionar el modoSonidos normales Cómo cambiar la dirección del aireCuidado DE SU Acondicionador DE Aire Solución DE ProblemasParece que el acondicionador de aire funciona excesivamente La unidad se enciende y se apaga demasiado, o no enfríaSe filtra agua del gabinete a su casa Accesorios Ayuda O Servicio Técnico1188081A

ACC082XR0 specifications

The Whirlpool ACC082XR0 is a versatile and efficient air conditioner designed to provide comfortable cooling for both residential and commercial spaces. With its sleek design and robust performance, this model stands out as an excellent choice for anyone seeking reliable climate control.

One of the main features of the ACC082XR0 is its cooling capacity. Equipped with a powerful compressor, this air conditioner can cool spaces up to 350 square feet, making it ideal for small to medium-sized rooms. Whether you are looking to beat the summer heat in your living room, bedroom, or office, this unit is designed to deliver refreshing air effectively and efficiently.

The ACC082XR0 also boasts energy-efficient technologies, which help minimize electricity consumption while maximizing cooling performance. It features a programmable timer, allowing users to set specific operating times for their air conditioner, which helps in reducing energy waste when cooling is not needed. Additionally, it comes with an Energy Saver mode that optimizes cooling performance by adjusting fan speed and compressor operation based on the desired temperature, further enhancing energy efficiency.

Moreover, the unit includes a multi-speed fan with adjustable settings that allow you to customize airflow according to your personal preference. This feature provides quiet operation during those hot summer nights, allowing you to sleep comfortably without any disturbances from excessive noise.

Another highlight of the ACC082XR0 is its user-friendly interface. The air conditioner is equipped with a digital display and remote control, enabling easy adjustments from anywhere in the room. The intuitive controls allow you to change temperatures, fan speeds, and modes with ease.

In addition to its cooling capabilities, the ACC082XR0 also features a built-in dehumidification function, which helps remove excess moisture from the air. This is particularly beneficial for humid climates, as it not only enhances comfort but also prevents mold and mildew growth within the living space.

Overall, the Whirlpool ACC082XR0 combines performance, efficiency, and convenience. With its powerful cooling capacity, energy-saving technologies, and user-friendly controls, it provides an excellent solution for anyone looking to maintain a comfortable indoor climate during the warm months. Whether for a home or office, this air conditioner promises a refreshing escape from the heat.
Top Page Image Contents