Whirlpool ACC082XR0 Electrical Requirements, Through-the-wall installation, Power Supply Cord

Page 4

Through-the-wall installation

The wall opening measurements should be:

■Height: 16" (40.6 cm) plus twice the thickness of wood used to build frame.

■Width: 22⁵⁄₈" (57.5 cm) plus twice the thickness of wood used to build frame.

■Depth: 2¹⁄₂" (6.4 cm) minimum to 8" (20.3 cm) maximum.

C

A

B

D

Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply cord.

Power supply

 

 

cord

Wiring requirements

 

■ 115-volt (103.5 min. - 126.5 max.)

 

■

0-12 amps

 

■

15-amp time-delay fuse or circuit breaker

■Use on single outlet circuit only.

■230-volt (207 min. - 253 max.)

 

¹⁄₄"

 

0-12 amps

(0.6 cm)

■

 

 

 

■ 15-amp time-delay fuse or circuit breaker

 

 

 

 

 

 

 

 

 

■

Use on single outlet circuit only.

 

 

 

 

C

A. 16" (40.6 cm)

C. Wood thickness

B. 22⁵⁄₈" (57.5 cm)

D.2¹⁄₂" (6.4 cm) minimum to

 

8" (20.3 cm) maximum

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Ground wire must be connected to ground screw located in lower right corner of air conditioner when air conditioner is in cabinet.

The electrical ratings for your air conditioner are listed on the model and serial number label. The model and serial number label is located behind the front panel on the front flange above the coil area.

Recommended ground method

This air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer's responsibility:

■To contact a qualified electrical installer.

■To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

Power Supply Cord

NOTE: Your unit’s device may differ from the one shown.

 

B

 

A

TEST

RESET

A. Reset button

B. Test button

This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect leakage current and power will be disconnected in a fraction of a second.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AIR Conditioner 1188081AAIR Conditioner Safety Table of ContentsÍndice Tools and Parts Installation RequirementsLocation Requirements Through-the-wall installation Power Supply CordElectrical Requirements Recommended ground methodInstallation Instructions To test your power supply cordUnpacking Remove packaging materialsInstalling Air Conditioner Back ViewBottom View Option 1-Wood, metal or plastic moldingPosition the Air Conditioner Cabinet Option 2-Plastered wall with no moldingFront View Top ViewComplete Installation AIR Conditioner USE Starting Your Air ConditionerTemperature ModeFan Speed Filter MonitorTo change the temperature display from F to C Timer DelayTo clear Timer delay program To select the modeTo raise the temperature To lower the temperatureChanging Air Direction Normal SoundsTroubleshooting AIR Conditioner CareTemperature on display does not match room temperature Air conditioner seems to run too muchAir conditioner cycles on and off too much or does not cool Water drips from cabinet into your houseAssistance or Service AccessoriesPage Seguridad DEL Acondicionador DE Aire Requisitos DE InstalaciónHerramientas y piezas Herramientas necesariasPiezas suministradas en algunos modelos Requisitos de ubicaciónInstalación en la ventana en algunos modelos Requisitos eléctricos Método recomendado para la puesta a tierraCable de suministro de energía El cable eléctrico Requisitos de cableadoDesempaque Instrucciones DE InstalaciónPara poner a prueba el cable de suministro de energía Instalación del acondicionador de aire Vista posteriorInstalación en una ventana en algunos modelos Vista inferiorOpción 1-Moldura de madera, metal o plástico Colocación del gabinete del Acondicionador de aireOpción 2-Pared enyesada sin moldura Vista frontal Vista superiorComplete la instalación Mode Modo Cómo Usar SU Acondicionador DE AireCómo poner en marcha su acondicionador de aire Fan Speed Velocidad de ventilaciónTemperatura Monitor del filtroPara cambiar la pantalla de la temperatura de F a C Para ver o cambiar el tiempo restante en horas Para encender o apagar el acondicionador de airePara seleccionar el modo Para subir la temperaturaCómo cambiar la dirección del aire Sonidos normalesSolución DE Problemas Cuidado DE SU Acondicionador DE AireLa unidad se enciende y se apaga demasiado, o no enfría Parece que el acondicionador de aire funciona excesivamenteSe filtra agua del gabinete a su casa Ayuda O Servicio Técnico Accesorios1188081A

ACC082XR0 specifications

The Whirlpool ACC082XR0 is a versatile and efficient air conditioner designed to provide comfortable cooling for both residential and commercial spaces. With its sleek design and robust performance, this model stands out as an excellent choice for anyone seeking reliable climate control.

One of the main features of the ACC082XR0 is its cooling capacity. Equipped with a powerful compressor, this air conditioner can cool spaces up to 350 square feet, making it ideal for small to medium-sized rooms. Whether you are looking to beat the summer heat in your living room, bedroom, or office, this unit is designed to deliver refreshing air effectively and efficiently.

The ACC082XR0 also boasts energy-efficient technologies, which help minimize electricity consumption while maximizing cooling performance. It features a programmable timer, allowing users to set specific operating times for their air conditioner, which helps in reducing energy waste when cooling is not needed. Additionally, it comes with an Energy Saver mode that optimizes cooling performance by adjusting fan speed and compressor operation based on the desired temperature, further enhancing energy efficiency.

Moreover, the unit includes a multi-speed fan with adjustable settings that allow you to customize airflow according to your personal preference. This feature provides quiet operation during those hot summer nights, allowing you to sleep comfortably without any disturbances from excessive noise.

Another highlight of the ACC082XR0 is its user-friendly interface. The air conditioner is equipped with a digital display and remote control, enabling easy adjustments from anywhere in the room. The intuitive controls allow you to change temperatures, fan speeds, and modes with ease.

In addition to its cooling capabilities, the ACC082XR0 also features a built-in dehumidification function, which helps remove excess moisture from the air. This is particularly beneficial for humid climates, as it not only enhances comfort but also prevents mold and mildew growth within the living space.

Overall, the Whirlpool ACC082XR0 combines performance, efficiency, and convenience. With its powerful cooling capacity, energy-saving technologies, and user-friendly controls, it provides an excellent solution for anyone looking to maintain a comfortable indoor climate during the warm months. Whether for a home or office, this air conditioner promises a refreshing escape from the heat.
Top Page Image Contents