Whirlpool ACC082XR0 manual Mode, Fan Speed, Filter Monitor, Temperature

Page 10

NOTES:

■When the air conditioner is off, the Room indicator light is lit and the display shows the current room temperature.

■If the room temperature is below 55ºF (13ºC), the display will show 55ºF (13ºC). If the room temperature is above 99ºF (37ºC), the display will show 99ºF (37ºC).

■When the Set indicator light is lit, the display shows the temperature control setting. See “Temperature” later in this section.

■When the Hour indicator light is lit, the display shows the time remaining on the Timer setting. See “Timer Delay” later in this section.

1.Remove clear protective film from control panel and front panel badge (on some models).

2.Press POWER to turn on air conditioner.

NOTE: When air conditioner is turned on for the first time

after it is plugged in, it will display the default settings: Cool mode, Turbo fan speed, 72°F (22°C) for 3 seconds. When it is turned on at all other times, it will display the previous settings for 3 seconds, and then display the room temperature.

3.Select mode. See “Mode” later in this section.

4.Select fan speed. See “Fan Speed” later in this section.

5.Set temperature. See “Temperature” later in this section.

Mode

1.Press MODE until you see the indicator light come on for the setting you desire.

2.Choose Auto, Cool, Fan Only or Power Saver.

■Auto—Cools room while it automatically controls fan speed. You cannot change fan speed, but you can adjust temperature by pressing the plus or minus button.

■Cool—Cools room. You can adjust temperature by pressing the plus or minus button. You can select fan speed by pressing FAN SPEED.

■Fan Only—Only the fan runs. You can select the fan speed by pressing FAN SPEED, but you cannot adjust the Temperature control setting. Display shows the current room temperature.

■Power Saver—Fan runs only when cooling is needed. You can select the fan speed by pressing FAN SPEED.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

Fan Speed

NOTE: The Fan Speed button will operate only when Cool, Fan Only or Power Saver mode has been selected.

1.Press FAN SPEED until you see the indicator light come on for the setting you desire.

2.Choose Turbo, High or Low.

Filter Monitor

1.When Filter indicator light is lit or flashing, remove, clean and replace air filter. See “Cleaning the Air Filter.”

2.Press and hold FILTER for 3 seconds after cleaning and replacing the air filter. This resets the Filter Monitor.

NOTE: After 360 hours of fan operating time, the Filter indicator light will turn on. It will remain on for 180 hours or until you press FILTER. After 180 hours, it will flash. It will continue flashing until you press FILTER.

Temperature

■Press the plus button to raise the temperature. Room indicator light will turn off, and Set indicator light will turn on. Display shows the Temperature control setting. Each time you press or hold the plus button, the temperature will increase 1º until it reaches 86°F (30°C).

NOTE: After 3 seconds, Set indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.

■Press the minus button to lower the temperature. Room indicator light will turn off, and Set indicator light will turn on. Display shows the Temperature control setting. Each time you press or hold the minus button, the temperature will decrease 1º until it reaches 64°F (18°C).

NOTE: After 3 seconds, Set indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents AIR Conditioner 1188081AAIR Conditioner Safety Table of ContentsÍndice Tools and Parts Installation RequirementsLocation Requirements Electrical Requirements Through-the-wall installationPower Supply Cord Recommended ground methodUnpacking Installation InstructionsTo test your power supply cord Remove packaging materialsBottom View Installing Air ConditionerBack View Option 1-Wood, metal or plastic moldingFront View Position the Air Conditioner CabinetOption 2-Plastered wall with no molding Top ViewComplete Installation AIR Conditioner USE Starting Your Air ConditionerFan Speed TemperatureMode Filter MonitorTo clear Timer delay program To change the temperature display from F to CTimer Delay To select the modeChanging Air Direction To raise the temperatureTo lower the temperature Normal SoundsTroubleshooting AIR Conditioner CareAir conditioner cycles on and off too much or does not cool Temperature on display does not match room temperatureAir conditioner seems to run too much Water drips from cabinet into your houseAssistance or Service AccessoriesPage Herramientas y piezas Seguridad DEL Acondicionador DE AireRequisitos DE Instalación Herramientas necesariasPiezas suministradas en algunos modelos Requisitos de ubicaciónInstalación en la ventana en algunos modelos Cable de suministro de energía Requisitos eléctricosMétodo recomendado para la puesta a tierra El cable eléctrico Requisitos de cableadoDesempaque Instrucciones DE InstalaciónPara poner a prueba el cable de suministro de energía Instalación en una ventana en algunos modelos Instalación del acondicionador de aireVista posterior Vista inferiorOpción 1-Moldura de madera, metal o plástico Colocación del gabinete del Acondicionador de aireOpción 2-Pared enyesada sin moldura Vista frontal Vista superiorComplete la instalación Cómo poner en marcha su acondicionador de aire Mode ModoCómo Usar SU Acondicionador DE Aire Fan Speed Velocidad de ventilaciónTemperatura Monitor del filtroPara cambiar la pantalla de la temperatura de F a C Para seleccionar el modo Para ver o cambiar el tiempo restante en horasPara encender o apagar el acondicionador de aire Para subir la temperaturaCómo cambiar la dirección del aire Sonidos normalesSolución DE Problemas Cuidado DE SU Acondicionador DE AireLa unidad se enciende y se apaga demasiado, o no enfría Parece que el acondicionador de aire funciona excesivamenteSe filtra agua del gabinete a su casa Ayuda O Servicio Técnico Accesorios1188081A

ACC082XR0 specifications

The Whirlpool ACC082XR0 is a versatile and efficient air conditioner designed to provide comfortable cooling for both residential and commercial spaces. With its sleek design and robust performance, this model stands out as an excellent choice for anyone seeking reliable climate control.

One of the main features of the ACC082XR0 is its cooling capacity. Equipped with a powerful compressor, this air conditioner can cool spaces up to 350 square feet, making it ideal for small to medium-sized rooms. Whether you are looking to beat the summer heat in your living room, bedroom, or office, this unit is designed to deliver refreshing air effectively and efficiently.

The ACC082XR0 also boasts energy-efficient technologies, which help minimize electricity consumption while maximizing cooling performance. It features a programmable timer, allowing users to set specific operating times for their air conditioner, which helps in reducing energy waste when cooling is not needed. Additionally, it comes with an Energy Saver mode that optimizes cooling performance by adjusting fan speed and compressor operation based on the desired temperature, further enhancing energy efficiency.

Moreover, the unit includes a multi-speed fan with adjustable settings that allow you to customize airflow according to your personal preference. This feature provides quiet operation during those hot summer nights, allowing you to sleep comfortably without any disturbances from excessive noise.

Another highlight of the ACC082XR0 is its user-friendly interface. The air conditioner is equipped with a digital display and remote control, enabling easy adjustments from anywhere in the room. The intuitive controls allow you to change temperatures, fan speeds, and modes with ease.

In addition to its cooling capabilities, the ACC082XR0 also features a built-in dehumidification function, which helps remove excess moisture from the air. This is particularly beneficial for humid climates, as it not only enhances comfort but also prevents mold and mildew growth within the living space.

Overall, the Whirlpool ACC082XR0 combines performance, efficiency, and convenience. With its powerful cooling capacity, energy-saving technologies, and user-friendly controls, it provides an excellent solution for anyone looking to maintain a comfortable indoor climate during the warm months. Whether for a home or office, this air conditioner promises a refreshing escape from the heat.
Top Page Image Contents