Troubleshooting

You can solve many common air conditioner problems easily, saving you the cost of a service call. Try the suggestions below to see whether you can solve your problem without outside help.

Air conditioner will not operate.

■The power supply cord is unplugged. Plug into a grounded 3 prong outlet. See “Electrical Requirements.”

■A household fuse has blown or circuit breaker has tripped. Replace the fuse or reset the circuit breaker. Plug into a grounded 3 prong outlet. See “Electrical Requirements.”

■On some models, the Fan Speed control is turned to the off position (on some models). Turn the FAN SPEED control to an active setting.

■On some models, the Power button has not been pressed. Press the POWER button.

■The local power has failed. Wait for power to be restored.

Air conditioner blows fuses or trips circuit breakers.

■Too many appliances are being used on the same circuit. Unplug or relocate appliances that share the same circuit.

■Time-delay fuse or circuit breaker of the wrong capacity is being used. Replace with a 15-amptime-delay fuse or circuit breaker of the correct capacity. See “Electrical Requirements.”

■An extension cord is being used. Do not use an extension cord with this or any other appliance.

■On some models, you are trying to restart the air conditioner too soon after turning FAN SPEED control off. Wait at least 3 minutes after turning FAN SPEED control off before trying to restart the air conditioner.

■On some models, you are trying to restart the air conditioner too soon after pressing the POWER button. Wait at least 3 minutes after pressing the POWER button before trying to restart the air conditioner.

Air conditioner seems to run too much.

■The current air conditioner replaced an older model. The use of more efficient components may cause the air conditioner to run longer than an older model, but the total energy consumption will be less. Newer air conditioners do not emit the “blast” of cold air you may be accustomed to from older units, but this is not an indication of lesser cooling capacity or efficiency. Refer to the efficiency rating (EER) and capacity rating (in BTUs/hr.) marked on the air conditioner.

■The air conditioner is in a heavily occupied room, or heat- producing appliances are in use in the room. Use exhaust vent fans while cooking or bathing and try not to use heat- producing appliances during the hottest part of the day. A higher capacity air conditioner may be required, depending on the size of the room being cooled.

Air conditioner cycles on and off too much.

■The air conditioner is not properly sized for your room. Check the cooling capabilities of your room air conditioner. Room air conditioners are not designed to cool multiple rooms.

■The filter is dirty or obstructed by debris. Clean the filter.

■The inside evaporator and outside condenser coils are dirty or obstructed by debris. See “Annual Maintenance.”

■There is excessive heat or moisture (open container cooking, showers, etc.) in the room. Use a fan to exhaust heat or moisture from the room. Try not to use heat- producing appliances during the hottest part of the day.

■The louvers are blocked. Install the air conditioner in a location where the louvers are free from curtains, blinds, furniture, etc.

■The outside temperature is below 65°F (18°C). Do not try to operate your air conditioner in the cooling mode when the outside temperature is below 65°F (18°C).

■The temperature of the room you are trying to cool is extremely hot. Allow extra time for the air conditioner to cool a very hot room.

■Windows or doors to the outside are open. Close all windows and doors.

■On some models, the Temperature control is not at a cool enough setting. Adjust the TEMPERATURE control to a cooler setting by turning the knob clockwise. Turn FAN SPEED control to TURBO.

■On some models, the Temperature control is not at a cool enough setting. Press and hold the down arrow button to lower the temperature 1ºF (0.56ºC) until it reaches 64ºF (18ºC).

■The air conditioner is installed on the sunny side of your house. Install your air conditioner in a more shaded window.

Water drips from cabinet into your house.

■The air conditioner is not properly leveled. The air conditioner should slope slightly downward toward the outside. Level the air conditioner to provide a downward slope toward the outside (¹⁄₂ bubble on a carpenter's level) to ensure proper drainage. See “Position the Air Conditioner.” Reposition or shim the cabinet as necessary.

NOTE: Do not drill a hole in the bottom of the metal base or condensate pan.

ACQ062MP0 specifications

The Whirlpool ACQ062MP0 is a versatile and efficient air conditioning unit designed to offer comfort in various settings. This window-mounted air conditioner is particularly suitable for small to medium-sized rooms, providing reliable cooling during the hot summer months.

One of the standout features of the Whirlpool ACQ062MP0 is its energy efficiency. With an Energy Efficiency Ratio (EER) that meets or exceeds industry standards, this unit helps reduce energy consumption while maintaining optimal cooling performance. The energy-saver mode further enhances efficiency by automatically adjusting the cooling speed and fan settings based on the ambient temperature.

The ACQ062MP0 is equipped with a cooling capacity of 6,000 BTUs, making it ideal for spaces ranging from approximately 250 to 300 square feet. This capability allows it to cool a room quickly and effectively, ensuring a comfortable environment even on the hottest days. The unit operates quietly, making it perfect for bedrooms or home offices where noise can be a distraction.

Another notable characteristic of the Whirlpool ACQ062MP0 is its user-friendly control panel. Featuring an intuitive interface, it allows users to set their desired temperature easily. The unit comes with multiple fan speeds and cooling settings, enabling customers to customize their cooling experience. Additionally, the programmable timer ensures that the air conditioner can be set to turn on or off according to the user’s schedule, enhancing convenience and energy savings.

The installation process of the ACQ062MP0 is straightforward, thanks to its compact design and included mounting hardware. Its sleek appearance blends seamlessly with various room aesthetics, making it a practical choice for homeowners and renters alike.

Furthermore, the Whirlpool ACQ062MP0 emphasizes air quality through its filter system. The washable filter traps dust and allergens, contributing to a healthier indoor environment. Routine cleaning of the filter is simple, ensuring that the air conditioner operates efficiently and maintains good air quality.

In summary, the Whirlpool ACQ062MP0 is an efficient, user-friendly window air conditioner that provides reliable cooling, enhanced air quality, and energy savings. With its combination of features, technologies, and thoughtful design, it stands out as a reliable choice for individuals seeking comfort in small to medium spaces.