EN Air Conditioner Use

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

•If you turn the air conditioner off and then turn the unit back on, the fan will come on, but the compressor will remain off for 3 minutes before turning back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

•Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

Starting your air conditioner

Press Power ON/OFF to turn on air conditioner. When the unit is turned on, it will display the previous settings for the MODE, FAN SPEED and temperature.

TEMPERATURE SELECTION Press▲ to raise the temperature. Each time you press or hold▲, the temperature will go up 1° until it reaches 86°F (30°C).

Press▼to lower the temperature.

Each time you press or hold▼, the temperature will go down 1° until it reaches 64°F (18°C).

MODE SELECTION

Press MODE until you see the indicator light come on for the setting you want. Choose AUTO, COOL, FAN or POWER SAVER.

AUTO – Cools room while it automatically

controls fan speed. You cannot change fan speed, but you can adjust temperature by pressing▲or▼.

COOL – Cools room. You can select fan speed by pressing FAN SPEED. You can then adjust temperature by pressing ▲or▼.

FAN – Fan runs on TURBO speed only. Only the fan runs. Display shows “FO” (fan only).

POWER SAVER – Fan and compressor run only when cooling is needed. Fan stops running when the room temperature matches the temperature you set.

Press FAN SPEED until you see the indicator light for the setting you want. Choose TURBO, HIGH

or LOW.

Select the temperature by pressing▲or▼.

FAN SPEED SELECTION

NOTE: FAN SPEED button will operate only when COOL or POWER SAVER mode has been selected.

Press FAN SPEED until you see the indicator light for the setting you want. Choose TURBO, HIGH or LOW.

	TIMER DELAY
	The TIMER can be set for a 1 to 24 hour
	delay until the air conditioner turns on or off.	ADJUST
	Press▲or▼to adjust the delay time.	ADJUST
	Press▲or▼to adjust the delay time.
	To set the TIMER delay to turn the air
	conditioner off, air conditioner must be in the
	ON mode.
	Press TIMER. (Indicator light will flash.)	TIMER
	Press▲or▼to change delay time (1 to 24
	Press▲or▼to change delay time (1 to 24
	hours).

Press TIMER or wait 10 seconds. (Indicator light will remain on.)

To set the TIMER delay to turn the air conditioner on, air conditioner must be in the OFF mode.

If you want to change the previous settings:

Turn air conditioner on.

Adjust MODE to AUTO, COOL, FAN, or POWER SAVER. Adjust FAN SPEED to TURBO, HIGH or LOW.

Adjust TEMPERATURE between 64°F (18°C) and 86°F (30°C).

Turn air conditioner off.

Press TIMER. (Indicator light will flash.)

Press▲or▼ to change delay time (1 to 24 hours). Press TIMER or wait 10 seconds.

If you want to keep the previous settings:

Turn air conditioner off.

Press TIMER. (Indicator light will flash.)

Press▲or▼to change delay time (1 to 24 hours). Press TIMER or wait 10 seconds.

To clear TIMER delay program, press and hold TIMER for 3 seconds. Indicator light will shut off. Air conditioner can be either on or off.

To see the remaining time (in hours), press TIMER once after it has been programmed. While the display is showing the remaining time, you can press▲ or▼to increase or decrease the time.

ACQ058MM0 specifications

The Whirlpool ACQ058MM0 is a sophisticated air conditioning unit designed to provide efficient cooling for various spaces while ensuring optimal comfort. This model encapsulates advanced technology, energy efficiency, and user-friendly features that make it a popular choice among consumers.

One of the standout features of the Whirlpool ACQ058MM0 is its energy efficiency. Equipped with a high EER (Energy Efficiency Ratio), this unit is designed to consume less power while delivering consistent cooling performance. This not only helps in reducing electricity bills but also contributes to a more sustainable environment. With its Energy Star certification, it assures users that they are making an eco-friendly choice without compromising on quality.

In terms of design, the ACQ058MM0 is compact and sleek, allowing it to blend seamlessly into various interior decors. Its contemporary aesthetic is complemented by practical functions, making it an attractive addition to any room. The unit has multiple cooling capacities, allowing for precise control tailored to the size of the room, ensuring that every corner is adequately cooled.

The Whirlpool ACQ058MM0 also boasts several advanced technologies. One of these is its three cooling speed settings, enabling users to select the ideal airflow level based on preference and room conditions. Additionally, the unit is equipped with a programmable thermostat that allows users to set their desired temperature, achieving comfort without unnecessary energy consumption.

Ease of use is another highlight of the ACQ058MM0. It comes with a remote control, allowing users to adjust settings from the comfort of their couches or beds. The digital display makes it easy to see the current settings and make adjustments as necessary. Moreover, the unit features a sleep mode that gradually adjusts the temperature during the night, promoting a restful sleep while conserving energy.

Maintenance is effortless with the ACQ058MM0, thanks to its convenient filter access. The washable and reusable filter helps to reduce airborne allergens, ensuring that the indoor air quality is maintained. Regular cleaning of the filter is simple, contributing to the longevity of the unit and better performance.

Overall, the Whirlpool ACQ058MM0 combines energy efficiency, advanced technology, and user-centric design, making it a standout air conditioning choice for those seeking comfort and functionality in their living spaces.