Whirlpool TA07002F0 manual Unit turns on and off too much, or does not cool room

Page 10

The unit turns on and off too much, or does not cool room

e room you are

Adjust the Thermostat to a cooler setting by turning the knob clockwise.

Turn Fan Control to HIGH.

loner In a more s

installed on the sunny

Water drips from cabinet into your house

Check if ...

1 Then ...

The air conditioner is not properly leveled. The air conditioner should slope slightly downward toward the outside.

Level the air conditioner to provide a 77 downward slope toward the outside (l/2 bubble on a carpenter’s level [or 1.l degrees]) to ensure proper drainage. See the Installation Instructions for an illustration. Reposition or shim the cabinet as necessary.

NOTE: Do NOT drill a hole in the bottom of the metal base and condensate pan.

Image 10

Contents Use&CareGuide Contents Air SafetyYour safety Is important To us It is your responsibility toOperating Instructions Starting your air conditionerUsing the Energy Saver settings Using the exhaust controlChanging air direction Air filter tips Cleaning the front panelCleaning the air filter For models with built-in filters see figurePerformina Annual Maintenanvce On nextRepairing paint damage Normal operating soundsUnit blows fuses or trips circuit breakers TroubleshootingYour air conditioner will not operate h Air conditionerUnit turns on and off too much, or does not cool room Water drips from cabinet into your houseRequesting Assistance or Service Ordering accessoriesWarranty Sealed refrigerationTable of Contents Thelocation shouldprovide Important Observe all governing codesFree movement of air to roomsto be cooled Tools needed ~ampratingor less 126.5~maxSeparatecircuit Goto Page5 for installationsteps Goto Page4 for installationstepsFollowtheinstructionsfor your typeof air conditioner Thesame.Whentheair conditioneris centered Cut foamblocksMounting hole Filler boardCurtain AlternateholePushI L Cabinetuntil panelsnapsm place