Whirlpool AS12 manual Outdoor unit installation, Air purging, Vacuum pump

Page 22

Installation instructions

Outdoor unit installation

1.Install Drain Port and Drain Hose (for heat-pump model only)

The condensate drains from the outdoor unit when the unit operates

 

 

in heating mode. In order not to disturb your neighbor and protect

 

 

the environment, install a drain port and a drain hose to direct the

 

 

condensate water. Just install the drain port and rubber washer to

 

 

the chassis of the outdoor unit, then connect a drain hose to the

 

Washer

port as the right figure shown.

Drain port

Drain hose

 

 

(prepare by user)

2.Install and Fix Outdoor Unit

Fix with bolts and nuts tightly on a flat and strong floor.

If installed on the wall or roof, make sure to fix the supporter well to prevent it from shaking due to serious vibration or strong wind.

3.Outdoor Unit Piping Connection

Remove the valve caps from the 2-way and 3-way valve.

Connect the pipes to the 2-way and 3-way valves separately according to the required torque.

4. Outdoor Unit Cable Connection (see previous page)

Air purging

The air which contains moisture remaining in the refrigeration cycle may cause a malfunction on the compressor. After connecting the indoor and outdoor units, evacuate air and moisture from refrigerant cycle using a vacuum pump, as shown below.

Note: To protect the environment, be sure not to discharge the refrigerant to the air directly.

See next page for air purging steps.

Vacuum pump

Service port

(2) Turn

indoor unit

Refrigerant flow direction

3-way valve

(7) Turn to fully open the valve

(1) Turn

2-way valve

(6) Open 1/4 turn

(7) Turn to fully open the valve

valve cap

(1) Turn

(8) Tighten

3-way valve diagram

connect to indoor unit

open position

spindle

needle

(8) Tighten

Valve cap

(8) Tighten

Connect to outdoor unit

Valve core

service port cap

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Preparation before use Auto Restart PresettingBack-light function optional Safety precautions OFFOutdoor unit Identification of partsIndoor unit Air IntakeCompressor indicator Temperature display Sleep Indicator UH series operating and displayRemote controller Remote controllerIndication symbols on LCD How to Use How to Insert the BatteriesStorage and Tips for Using the Remote Controller Choose Cooling Only Remote controller or Heat PumpSetting temperature Selecting modeFAN mode Operation instructionsAirflow direction control Airflow direction controlClock button 6th sense modeAdjustment procedure Your feelingHow to set Timer on Timer modeHow to cancle Timer on Jet mode Sleep modeSleep mode Jet modeFront panel maintenance MaintenanceAir filter maintenance Protection Protective device will work at following casesTroubleshooting Trouble AnalysisInstallation instructions Installation diagramLocation for Installing Outdoor Unit Location for Installing Indoor UnitSelect the best location Indoor Unit Piping Installation Indoor unit installationInstalling the Mounting Plate Drill a Hole for PipingPiping Connection Piping Joints Thermal InsulationPiping Thermal Insulation Model Pipe size Torque Nut width Min.thicknessConnecting of the Cable Indoor Unit Outdoor UnitIndoor unit Outdoor unit Air purging Outdoor unit installationVacuum pump How to Purge Air Tubes

AS12 specifications

The Whirlpool AS12 is a remarkable air conditioner known for its efficient cooling capabilities and user-friendly features. Designed to provide comfort in residential spaces, it exemplifies modern technology and energy efficiency.

One of the standout features of the Whirlpool AS12 is its intelligent cooling system. This model utilizes advanced inverter technology, which allows it to adjust the compressor speed based on the room temperature. This ensures consistent cooling while minimizing energy consumption, making it an eco-friendly choice for homeowners looking to save on electricity bills.

In terms of design, the AS12 operates quietly, maintaining a noise level as low as 30 dB. This makes it ideal for bedrooms and living rooms where noise can be a distraction. Additionally, the sleek and modern aesthetic of the unit allows it to blend seamlessly with various interior decors.

The AS12 offers multiple operating modes, including cooling, dehumidification, and fan mode. This versatility allows users to customize their indoor climate according to their specific needs. The energy-saving mode further enhances its efficiency, automatically regulating temperature settings based on preferences to ensure optimal comfort without unnecessary power usage.

This air conditioner also features a special anti-viral filter that helps reduce airborne bacteria and allergens, promoting healthier indoor air quality. The filter is easy to clean and replace, extending the lifespan of the unit and ensuring it operates at peak performance.

Another notable aspect of the Whirlpool AS12 is its user-friendly remote control, which allows users to adjust settings from anywhere in the room. Smart features enable connectivity with mobile devices, providing control over the air conditioner through dedicated apps. This feature is particularly convenient for those who like to monitor and adjust their home’s cooling system while on the go.

Overall, the Whirlpool AS12 stands out due to its blend of technology, efficiency, and user-centric features. With its ability to provide tailored comfort, low noise levels, and improved air quality, it is an excellent choice for anyone seeking a reliable and effective air conditioning solution for their home.
Top Page Image Contents