Connecting of the Cable Indoor Unit, Outdoor Unit

Installation instructions

4. Connecting of the Cable

Indoor Unit

Connect the power connecting cord to the indoor unit by connecting the wires to the terminals on the control board individually in accordance with the outdoor unit connection.

Note: For some models, it is necessary to remove the cabinet to connect to indoor unit terminal.

Outdoor Unit

1). Remove the access door from the unit by loosening the screw. Connect the wires to the terminals on the control board individually as the following.

2). Secure the power connecting cord onto the control board with cable clamp.

3). Reinstall the access door to the original position with the screw.

Front panel

Terminal (inside)

Cabinet

Indoor unit

Chassis

Access door

Terminal(inside)

Outdoor unit

The figures in this manual are based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner you have selected.

Caution:

1.Never fail to have an individual power circuit specifically for the air conditioner. As for the method of wiring, refer to the circuit diagram posted on the inside of the access door .

2.Comfirm that the cable thickness is as specified in the power source specification. (See the cable specification table below)

3.Check the wires and make sure that they are all tightly fastened after cable connection.

4.Be sure to install an earth leakage circuit breaker in wet or moist area.

Cable Specifications

Capacity	Power cord		Power connecting cord				Main
(Btu/h)							power
	Type	Normal cross	Type	Normal cross
							supply
		- sectional area		- sectional area
9K,12K	H05VV-F	1.0~1.5mm2X3	H07RN-F	1.5mm2X3			To indoor
18K	H05VV-F	2	H07RN-F	1.5mm	2	X3	To indoor
	RVV	1.5~2.0mm X3

Attention:

Accessibility to the plug must be guaranteed even after the installation of the appliance to disconnect it in case of need. If not possible, connect appliance to a double-pole switching device with contact separation of at least 3 mm placed in an accessible position even after installation.

AS12 specifications

The Whirlpool AS12 is a remarkable air conditioner known for its efficient cooling capabilities and user-friendly features. Designed to provide comfort in residential spaces, it exemplifies modern technology and energy efficiency.

One of the standout features of the Whirlpool AS12 is its intelligent cooling system. This model utilizes advanced inverter technology, which allows it to adjust the compressor speed based on the room temperature. This ensures consistent cooling while minimizing energy consumption, making it an eco-friendly choice for homeowners looking to save on electricity bills.

In terms of design, the AS12 operates quietly, maintaining a noise level as low as 30 dB. This makes it ideal for bedrooms and living rooms where noise can be a distraction. Additionally, the sleek and modern aesthetic of the unit allows it to blend seamlessly with various interior decors.

The AS12 offers multiple operating modes, including cooling, dehumidification, and fan mode. This versatility allows users to customize their indoor climate according to their specific needs. The energy-saving mode further enhances its efficiency, automatically regulating temperature settings based on preferences to ensure optimal comfort without unnecessary power usage.

This air conditioner also features a special anti-viral filter that helps reduce airborne bacteria and allergens, promoting healthier indoor air quality. The filter is easy to clean and replace, extending the lifespan of the unit and ensuring it operates at peak performance.

Another notable aspect of the Whirlpool AS12 is its user-friendly remote control, which allows users to adjust settings from anywhere in the room. Smart features enable connectivity with mobile devices, providing control over the air conditioner through dedicated apps. This feature is particularly convenient for those who like to monitor and adjust their home’s cooling system while on the go.

Overall, the Whirlpool AS12 stands out due to its blend of technology, efficiency, and user-centric features. With its ability to provide tailored comfort, low noise levels, and improved air quality, it is an excellent choice for anyone seeking a reliable and effective air conditioning solution for their home.