Whirlpool AS12 manual How to Purge Air Tubes

Page 23

Installation instructions

How to Purge Air Tubes:

(1). Unscrew and remove caps from 2 and 3-way valves.

(2). Unscrew and remove cap from service valve.

(3). Connect vacuum pump flexible hose to the service valve.

(4). Start vacuum pump for 10-15 minutes until reaching a vacuum of 10 mm Hg absolutes.

(5). With vacuum pump still running close the low pressure knob on vacuum pump manifold. Then stop vacuum pump.

(6). Open 2-way valve 1/4 turn then close it after 10 seconds. Check tightness of all joints using liquid soap or an electronic leak detector.

(7). Turn 2 and 3-way valves stem to fully the valves. Disconnect vacuum pump flexible hose.

(8). Replace and tighten all valve caps.

Notes

Please read this manual before installing and using it.

Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.

Testing run the air conditioner after finishing installation, and record details of operation.

Type of fuse used on indoor unit controller is 50T, with rating 2.5A,AC250V.

The fuse for the whole unit is to be provided by the user according to the current at maximum power

Input or use other over-current protective device instead.

Only the air conditioner can be connected to the power line.

The power connection for the air conditioner has to be done at the main power distribution which has to be of a low impedance.

In order to ensure the suitability of the equipment for connection, the user should consult with the supply authority, if necessary, that the service current capacity at the interface point is sufficient for the equipment.

Refer to the rating plate of the equipment for power consumption details.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.

22

Page 22 Page 23
Image 23
Page 22 Page 23
Contents Page Back-light function optional Auto Restart PresettingPreparation before use OFF Safety precautionsAir Intake Identification of partsIndoor unit Outdoor unitUH series operating and display Compressor indicator Temperature display Sleep IndicatorIndication symbols on LCD Remote controllerRemote controller Choose Cooling Only Remote controller or Heat Pump How to Insert the BatteriesStorage and Tips for Using the Remote Controller How to UseOperation instructions Selecting modeFAN mode Setting temperatureAirflow direction control Airflow direction controlYour feeling 6th sense modeAdjustment procedure Clock buttonHow to cancle Timer on Timer modeHow to set Timer on Jet mode Sleep modeSleep mode Jet modeAir filter maintenance MaintenanceFront panel maintenance Protective device will work at following cases ProtectionTrouble Analysis TroubleshootingInstallation diagram Installation instructionsSelect the best location Location for Installing Indoor UnitLocation for Installing Outdoor Unit Drill a Hole for Piping Indoor unit installationInstalling the Mounting Plate Indoor Unit Piping InstallationModel Pipe size Torque Nut width Min.thickness Piping Joints Thermal InsulationPiping Thermal Insulation Piping ConnectionOutdoor Unit Connecting of the Cable Indoor UnitIndoor unit Outdoor unit Vacuum pump Outdoor unit installationAir purging How to Purge Air Tubes

AS12 specifications

The Whirlpool AS12 is a remarkable air conditioner known for its efficient cooling capabilities and user-friendly features. Designed to provide comfort in residential spaces, it exemplifies modern technology and energy efficiency.

One of the standout features of the Whirlpool AS12 is its intelligent cooling system. This model utilizes advanced inverter technology, which allows it to adjust the compressor speed based on the room temperature. This ensures consistent cooling while minimizing energy consumption, making it an eco-friendly choice for homeowners looking to save on electricity bills.

In terms of design, the AS12 operates quietly, maintaining a noise level as low as 30 dB. This makes it ideal for bedrooms and living rooms where noise can be a distraction. Additionally, the sleek and modern aesthetic of the unit allows it to blend seamlessly with various interior decors.

The AS12 offers multiple operating modes, including cooling, dehumidification, and fan mode. This versatility allows users to customize their indoor climate according to their specific needs. The energy-saving mode further enhances its efficiency, automatically regulating temperature settings based on preferences to ensure optimal comfort without unnecessary power usage.

This air conditioner also features a special anti-viral filter that helps reduce airborne bacteria and allergens, promoting healthier indoor air quality. The filter is easy to clean and replace, extending the lifespan of the unit and ensuring it operates at peak performance.

Another notable aspect of the Whirlpool AS12 is its user-friendly remote control, which allows users to adjust settings from anywhere in the room. Smart features enable connectivity with mobile devices, providing control over the air conditioner through dedicated apps. This feature is particularly convenient for those who like to monitor and adjust their home’s cooling system while on the go.

Overall, the Whirlpool AS12 stands out due to its blend of technology, efficiency, and user-centric features. With its ability to provide tailored comfort, low noise levels, and improved air quality, it is an excellent choice for anyone seeking a reliable and effective air conditioning solution for their home.
Top Page Image Contents