Whirlpool 1328891 CompleteInstallation, Close the window onto the window slider kit to secure

■If the window opening is too narrow for the window slider kit, remove the inner slider section from the window slider kit.

7.Insert ¹⁄₂" screw (provided) into the hole in the inner slider section that is closest to the end of the outer slider section of the window slider kit.

A

B

A. Inner slider section

B. Outer slider section

■Using a saw, cut the inner slider section to fit the window opening.

■Slide the inner slider section into the outer slider section of the window slider kit.

6.Place the window slider kit into the window, extending it to fit the width of the window. Be sure the rain cover is on the outside of the window.

NOTE: For casement window installation, the window slider kit may be installed vertically with the window slider kit opening at the bottom.

A

B

C

A. ¹⁄₂" screw (provided)

B. Inner slider section

C. Outer slider section

8.Close the window onto the window slider kit to secure.

A B

C

F	E	D
A. To portable air conditioner		D. Window slider kit
B. Outdoors		E. Window exhaust adapter
C. Rain cover		F. Flexible exhaust hose

CompleteInstallation

1.Place the window-lock bracket on top of the lower window and against the upper window sash.

2.Use ¹⁄₈" drill bit to drill a starter hole through the hole in the bracket.

3.Attach the window-lock bracket to the window sash with ³⁄₄" screw to secure the window in place.

A

B

A. Upper window sash

B. Window-lock bracket

7