Whirlpool AD35DSS1 manual NormalSounds, Option 2-Connect Drain Hose

Page 7

Option 2—Connect Drain Hose

If you plan to run your dehumidifier continuously, you may want to attach a garden hose to the drain hose connector.

1.Use a flat-blade screwdriver to gently pry out the drain hose connector cover. Discard the cover.

A

B

A. Drain hose connector cover

B.Bucket

2.Remove bucket.

3.Attach a garden hose to drain hose connector on the inside of the dehumidifier. Hand tighten.

A

B

A. Garden hose

B. Drain hose connector

4.Place the other end of garden hose into a floor drain. Check to see that the hose lies flat and is in the drain.

5.Reinstall bucket.

NOTES:

To use the bucket without the garden hose, remove the garden hose. Then reinstall bucket.

The bucket must be installed and properly aligned for the dehumidifier to operate with or without a garden hose connected.

NormalSounds

When your dehumidifier is operating normally, you may hear sounds such as:

Compressor sounds, which may be loud. This is normal.

Clicking sounds when the dehumidifier or compressor turns off and on, and when the Automatic Shutoff Switch is working.

Air movement from the fan.

7

Image 7
Contents 1188927 DehumidifierDehumidifier Safety Table of ContentsÍndice Recommended grounding method Installation RequirementsElectrical Requirements LocationRequirementsDehumidifier USE Setting theControlsControlTypes 1and2 OnlyFan Speed Control Type 4 Models Only SettingtheControlsControl Types 3and4OnlyStarting/Stopping the Dehumidifier Fan Speed Control Type 3 Models OnlyDesired Humidity DrainingtheDehumidifierOption 1-Remove Bucket Option 2-Connect Drain Hose NormalSoundsCleaning theDehumidifier CleaningtheAirFilteronsomemodelsDehumidifier Care Air coming from dehumidifier is warm TroubleshootingIce forms on coils Dehumidifier runs but does not dehumidifyU.S.A Assistance or ServiceCanada Please record your models information Su seguridad y la seguridad de los demás es muy importante Seguridad DEL DeshumidificadorMétodo recomendado para la puesta a tierra Requisitos DE InstalaciónRequisitoseléctricos Requisitos deubicaciónEncender/Apagar el deshumidificador Luz de Empty/Adjust Bucket Vacíe/Ajuste el baldeCómo Usar EL Deshumidificador Ajustedeloscontroles Sóloparamodeloscon controles tipo1y2Dryness Control Control de sequedad AjustedeloscontrolesSóloparamodelos concontrolestipo3y4Opción 1-Saque el balde Cómodesaguarel deshumidificadorVelocidad de ventilación Sólo para modelos con control tipo Humedad deseadaOpción 2 Conecte la manguera de desagüe SonidosnormalesBalde de agua Cuidado DEL DeshumidificadorLimpiezadel filtrodeaireen algunos modelos Limpiezadel deshumidificadorEstá tibio el aire que viene del deshumidificador Solución DE ProblemasSe forma hielo en los serpentines El deshumidificador funciona pero no deshumidificaEn los EE.UU Ayuda O Servicio Técnico