Bosch Appliances D623, D625 manual View Point Trouble Cmd, System Test Cmd

Page 22
Testing Bell.

D623 Series/D625 Series User's Guide View Point Trouble (Cmd 48)

View Point Trouble (Cmd 48)

Use this command to view any points (if any) that are in trouble.

1.Ensure the system is turned off (On indicator is off).

2.Press [CMD] [4] [8]. The keypad may prompt you to enter a valid passcode.

3.Enter your passcode if necessary. The keypad scrolls through all points in trouble.

Be sure to investigate the source of the trouble condition. Correct the condition if possible. For example, remove objects blocking a sensor point or respond appropriately to the trouble indicated.

If there are no points in trouble, the keypad displays:

There are no point troubles.

4.Press [CMD] to return to the normal display.

System Test (Cmd 41)

￿I can perform this command.

￿I cannot perform this command.

The System Test ensures your system is operating correctly by testing the system’s bell, strobe, battery, and phone line. Only those programmed by your installing security company will be tested. For example, the system may only be programmed to test the back- up battery and the bell output.

I can test:

￿System Bell

￿Battery

￿System Strobe

￿Phone Line

If any of these components fail to test, contact your security company for assistance. Be sure to contact your security company before you begin the system test.

1.Ensure the system is turned off (On indicator is off).

2.Press [CMD] [4] [1]. The keypad may prompt you to enter a valid passcode.

3.Enter your passcode if necessary. The system starts the test. The bell output is tested first and should sound for approximately 2 sec to 3 sec The display shows:

4.Listen for bell activation.

The strobe output is tested next. This test resets after approximately 20 min or when [*] is pressed.

Testing Strobe.

Press * to End

5.Check for strobe activation.

The next component to be tested is the back-up battery. This test may take up to 4 min.

Testing Battery

May take 4 min.

The keypad displays the result of the battery test:

 

 

Battery Test

 

 

failed!

Battery Test

or

 

passed.

 

Please call for

 

 

 

 

 

service.

Finally, the phone connection is tested. This test may take up to 10 min.

Testing Phone.

May take 10 min.

The keypad displays the result of the phone line test:

 

 

Phone Test

 

 

failed.

Phone Test

or

 

passed.

 

Please check for

 

 

 

 

 

dial tone.

 

 

 

6.When the test is complete, the system returns to the normal display.

7.To stop the test currently in progress and skip to the next test, press [*] . To abort all system tests and return to the normal display, press [CMD].

22

Bosch Security Systems 9/04 46841E

Page 21 Page 23
Image 22
Page 21 Page 23
Contents D623 Series/D625 Series Users GuideD623 Series/D625 Series Users Guide Information BoxContents Figures TablesIntroduction About this User GuideD623 Series/D625 Series Users Guide About this User Guide Are All Points the Same? Security System BasicsAll On Part OnD623 Series/D625 Series Users Guide Keypad Keys Keypad KeysKeypad Tones Keypad KeysHow Your System Reports Alarms Keypad LED DescriptionsLog Out of the System Silence AlarmsCheck System Status D623 Series/D625 Series Users Guide Check System StatusTurn the System Off Keypad Adjust CmdD623 Series/D625 Series Users Guide Keypad Adjust Cmd Turn the System All On All On or CmdTurn the System Part On Part On or Cmd Seconds to All OnTurn the System Part 2 On Cmd Turn the System On with No DelaySet Part 2 Points Cmd Turn the System On with No Exit Tone Delay Silent Silencing Exit Tone Turn the System On with Points Faulted Force ArmSilencing the Exit Delay Tone doubles Exit Delay period Force-arming is not permitted for UL applicationsD623 Series/D625 Series Users Guide View Faulted Points View Faulted PointsBypass Points Change Passcode Cmd Date and Time CmdD623 Series/D625 Series Users Guide Date and Time Cmd Change Others’ Passcodes Cmd Change Others’ Passcode Authority Levels CmdAdd a Passcode Cmd D623 Series/D625 Series Users Guide Add a Passcode CmdDelete Passcodes Cmd D623 Series/D625 Series Users Guide Delete Passcodes CmdRenew One-time Passcodes Cmd Check System Troubles CmdD623 Series/D625 Series Users Guide View Alarm Memory Cmd View Alarm Memory CmdView System Trouble Cmd System Test Cmd View Point Trouble CmdD623 Series/D625 Series Users Guide View Point Trouble Cmd Turn Watch On/Off Cmd Reset the System CmdWalk Test Cmd D623 Series/D625 Series Users Guide Walk Test CmdExtend Auto On Time Cmd Select Watch Tone CmdSelect Watch Points Cmd D623 Series/D625 Series Users Guide Select Watch Tone CmdAll On Skeds Sked All Days FeatureChange Skeds Cmd Part On SkedsPart 2 On Skeds Output Off Skeds Off SkedsOutput On Skeds This section is intended for turning outputs onAll Areas Off Cmd Change Outputs CmdRemote Program Cmd All Areas On CmdMove to Area Cmd Auto-Forward On Setup CmdD623 Series/D625 Series Users Guide Move to Area Cmd Auto-Forward Off Setup Cmd Auto-Forward On/Off CmdRemote Arming with Telephone, Area View Log CmdD623 Series/D625 Series Users Guide Basic Pager Reports Basic Pager ReportsCharacter Code Information Control Panel Event Descriptions Control Panel Event DescriptionsEntry/exit delay by +Dly, Usr Exit/entry delay by user IV, Alarm Control Panel Event Descriptions Only Fire Safety and Evacuation Security System LimitationsBedroom Basement How to clean the keypad Maintenance and ServicePower Failure D623 Series/D625 Series Users Guide Maintenance and ServiceGlossary D623 Series/D625 Series Users Guide GlossaryIndex D623 Series/D625 Series Users Guide IndexLED Program D623 Series/D625 Series Users Guide D623 Series/D625 Series Users Guide D623 Series/D625 Series Users Guide Bosch Security Systems 46841E

D623, D625 specifications

Bosch Appliances has long been synonymous with innovation, quality, and performance in the household appliance sector. Among their stellar offerings, the Bosch D625 and D623 dishwashers stand out due to their unique features and cutting-edge technologies.

The Bosch D625 dishwasher is particularly known for its spacious design and efficient cleaning capabilities. With a capacity of up to 16 place settings, it is perfect for larger households or those who frequently entertain guests. One of its key technologies, the PrecisionWash system, utilizes intelligent sensors that continuously scan the dishes throughout the cycle. This ensures optimal cleaning performance, adjusting water pressure and temperature as needed for superior results.

Additionally, the D625 offers a range of wash cycles, including a quick wash for busy days and a heavy-duty cycle for tougher, baked-on food. The EcoSilence Drive motor operates quietly, making it one of the most silent dishwashers in its category, allowing you to run it any time without disturbance.

On the other hand, the Bosch D623 model also boasts impressive capacity and features. Similar to the D625, it has the flexibility to accommodate 14 place settings and comes equipped with the efficient PrecisionWash technology. The D623 is distinguished by its adjustable upper rack, allowing users to customize the interior layout for odd-shaped or oversized items.

Both models emphasize energy efficiency, complying with stringent energy standards. The Energy Star rating means they consume less water and power compared to standard dishwashers, making them both environmentally friendly and cost-effective.

In terms of design, both dishwashers incorporate a sleek stainless-steel finish that adds a modern touch to any kitchen. The intuitive control panel is user-friendly, featuring a digital display that allows easy selection of cycles and options.

Overall, the Bosch D625 and D623 dishwashers exemplify Bosch's dedication to bringing technology and convenience into the kitchen. With an array of features designed to enhance the user experience, these models remain a top choice for homeowners seeking reliability, efficiency, and exceptional cleaning performance in their dishwashing appliances.
Top Page Image Contents