Bosch Appliances manual Keypad Tones, D623 Series/D625 Series Users Guide Keypad Keys

D623 Series/D625 Series User's Guide Keypad Keys

Keypad Keys

Your Text keypad has nineteen keys for performing the various functions described below:

Table 1: Keypad Keys

Key	Function
[1], [2], [3],	Numeric keys used to enter passcodes
[4], [5], [6],	and issue commands.
[7], [8], [9],
[0]
[CMD]	Used in conjunction with numeric keys to
	enter commands. Also displays system
	status.
[ALL ON]	Turns your system All On (refer to Turn
	the System All On (All On or Cmd 1) on
	page 10).
[PART ON]	Turns your system Part On (refer to Turn
	the System Part On (Part On or Cmd 2)
	on page 11).
[NO DELAY]	Turns your system All On or Part On
	without entry or exit delay (refer to Turn
	the System On with No Delay on
	page 12).
[BYPASS]	Bypasses one or more points (refer to
	Bypass Points on page 15).
[*]	When available, advances to the next
	display.
[A], [B], [C]	Emergency functions (Fire, Panic, or
	Emergency Alarms) may be assigned to
	these keys by your security company.
	To activate the special function, press the
	key twice (consecutively) within 2 sec.
	Your security company labels each key
	with its assigned function.

Keypad Tones

The keypad emits several distinct tones and illuminates lights to alert you to system events.

Table 2: Keypad Tones

Tone	Description
Fire Alarm	When fire point activates, the keypad emits
	a repeated warble tone (on for 2 sec., then
	briefly off).
Burglary Alarm	When a burglary point activates while your
	system is turned on, the keypad emits a
	continuous warble tone. The sounder
	remains on for the duration of the time set
	by your security company.
Trouble	When a system component is not
	functioning properly, your keypad emits a
	repeated warble tone (on briefly, followed
	by a pause, followed by the warble tone).
	Press [4] to view the trouble. If problem is
	point-related, the keypad display indicates
	the faulted point.
Key Press	Pressing any key on the keypad sounds a
	short pip to indicate the pressed key is
	accepted.
Entry Delay	When you enter the premises through a
	point programmed for Entry Delay, the
	keypad emits an intermittent beep to
	remind you to turn your system off. If the
	system is not turned off before the Entry
	Delay expires, an alarm condition occurs
	and a report may be sent to your alarm
	company.
Exit Delay	After you turn your system on, the keypad
	emits an intermittent beep and counts
	down the Exit Delay time. If you do not exit
	before the Exit Delay time expires and an
	Exit Delay point is faulted, an alarm event
	begins.
Error	If you press an incorrect key, your keypad
	emits an error tone to indicate an invalid
	entry. The Error Tone is the same warble
	tone as the Trouble Tone, but is not
	repeated.
OK	Indicates a keypad entry is accepted, such
	as a correctly entered passcode. The
	Keypad emits a single, high-pitched beep
	for 1 sec.
Watch	If any watched point is faulted, the keypad
	emits a tone to alert. The tone varies in
	duration, depending on the selected
	Watched Tone (refer to Select Watch
	Tone (Cmd 62) on page 24).

Bosch Security Systems 9/04 46841E 7