Axis Communications 211a, 210A user manual Operating conditions

Page 50

50AXIS 210/210A/211/211A - Technical Specifications

Item

Specification

 

 

Processors, memory, clock

• CPU: ETRAX 100LX 32bit

 

• Video processing and compression: ARTPEC-2

 

• RAM memory: 16 MB (AXIS 210/211) 32 MB (AXIS 210A/211A)

 

• Flash memory: 4 MB (AXIS 210/211) 8 MB (AXIS 210A/211A)

 

• Battery backed up real-time clock

 

 

Power

7-20V DC, max 5W

 

• Power over Ethernet (IEEE 802.3af), power classification Class 0 (AXIS 211) or

 

Class 2 (AXIS 210A/211A) (max 6.49 W)

 

 

Operating conditions

• Temperature: +5oC to +45oC (41oF to 113oF)

 

• Humidity: 20-80% RH.

 

 

Audio (AXIS 210A/211A)

Full-duplex, half-duplex, simplex or no audio

 

• Encoding formats (selected under System Options):

 

ADPCM format at 24kbps, 8 kHz sampling (G.726 - select G723 from

 

drop-down list)

 

ADPCM format at 32kbps, 8 kHz sampling (G.726 - select G721 from

 

drop-down list)

 

PCM ∝−law format at 64kbps, 8 kHz sampling (G.711 default)

 

Built-in microphone with adjustable input sensitivity (low/high).

 

• External audio input: Single 3.5mm input for a mono microphone, or line-in

 

mono signal (left channel is used from a stereo signal).

 

• Microphone input sensitivity: High = max -38 dBu (28 mVpp), Low = max -18

 

dBu (270 mVpp)

 

• Line input: max: 11.2 dBu (8.0 Vpp)

 

• DC power through input connector for external microphones supported.

 

• Audio output (line level) connects to PA system or active speaker with built-in

 

amplifier. Headphones can also be connected. A stereo connector must be used

 

for the audio out.

 

• Audio output: max 3.0 Vpp (+2.7dBu)

 

• Audio output impedance: min 32 ohm

 

 

Installation, management and

• Installation tool on CD, web-based configuration

maintenance

• Configuration backup and restore

 

• SNMP support (AXIS 210A/211A only)

 

• Firmware upgrades over HTTP or FTP, firmware available at www.axis.com

 

 

Video access from

• Camera live view

Web browser

• Sequence tour capability for up to 20 Axis cameras

 

• Customizable HTML pages

 

 

Minimum web browsing

• Pentium III CPU 500 MHz or higher, or equivalent AMD

requirements

• 128 MB RAM

 

• AGP graphic card, Direct Draw, 32 MB RAM

 

• Windows XP, 2000, NT4.0*, ME* or 98* (* Motion JPEG only)

 

• DirectX 9.0 or later

 

• Internet Explorer 6.x or later

 

For other operating systems and browsers, see www.axis.com/techsup

 

 

Image 50
Contents Axis 210/210A/211/211A Network Cameras User’s Manual About this Document Contents Axis 210/210A/211/211A Product features IntroductionExtra features Underside OverviewAxis 210/AXIS 210A Axis 211/AXIS 211A Rear panelNetwork LED IndicatorsPower StatusAccessing the Camera Access From a BrowserFocusing Setting the PasswordAccessing the camera from the Internet SaveLive View Audio controls for Axis 210A/211A Motion Jpeg Video StreamsVideo Stream Types How to stream MPEG-4 MPEG-4 protocols and communication methodsRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Using Motion JpegUsing MPEG-4 Audio Stream Types Axis 210A/211A onlyAccessing the Audio Streams QuickTime/Windows Media PlayerSetup Tools Accessing the Setup toolsImage Appearance Video & Image settingsImage Settings Video Stream Overlay/Mask SettingsText Overlay Settings TestOverlay image requirements Configure area as privacy maskUpload and use an overlay Image Formats Image SizeAdvanced Settings Camera SettingsMPEG-4 Settings Axis Media ControlAudio Axis 210A/211A only Audio SettingsEnable Audio Audio ChannelsAudio Input Advanced Audio Settings Audio OutputNoise canceller threshold level Noise canceller attenuation Live View Config Use custom settingsUser-defined Links Upload Own Web FilesOwn Home Example Check Show Custom LinkAction Buttons Default Video FormatDefault Viewer Output ButtonsHtml Examples Sequence ModeViewer settings External VideoAxis 210/210A/211/211A Live View Config Definitions Event ConfigurationEvent Servers Triggered Event Configuring Event TypesHow to set up a triggered event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Scheduled EventMotion Detection Port Status Object SizeIP Address Filtering System OptionsSecurity ReferralsHttps Axis 210A/211A only Date & Time Network Basic TCP/IP SettingsIP Address Configuration DNS Configuration Network Advanced TCP/IP SettingsServices NTP ConfigurationLink-Local Address NAT TraversalNetwork Traffic Network SocksNetwork Smtp e-mail Network Snmp Axis 210A/211A onlyNetwork UPnP LED SettingsMaintenance Network RTP / MPEG-4Advanced ConfigurationSupport Resetting to the Factory Default Settings Using the Control ButtonI/O Terminal Connector Pinout and InterfaceSchematic Diagram Terminal Connectors Technical Specifications ModelsOperating conditions Accessories General performance considerations Optimizing your systemFrame rates Motion Jpeg and MPEG-4 BandwidthChecking the Firmware TroubleshootingSetup Basic Configuration Upgrading the FirmwareEmergency Recovery Procedure Axis SupportCamera is accessible locally, but not externally Problems setting the IP addressCamera cannot be accessed from a browser Etc, to a destination outside the local networkDecode only I frames Video/Image problems generalVideo/image problems MPEG-4 Poor quality snapshot images Status and Network indicator LEDs are flashing red rapidlyProblems uploading files Browser freezesPoor audio quality Audio volume too low/highLevels in Audio Advanced Settings Glossary of Terms Axis 210/210A/211/211A Glossary of Terms Index Http ServerSerial Number Server Time Services Simple profile Simplex 6 Pinout I/O connectors 47 PoE 6Push to talk Recovery Referrals Restore 44 RTP Snapshot button Snmp 6Axis 210/210A/211/211A Index Page Axis 210/210A/211/211A User’s Manual Rev .2 Part No
Related manuals
Manual 60 pages 4.31 Kb

210A, 211, 210, 211a specifications

Axis Communications is a renowned brand in the field of network video solutions, providing innovative products for surveillance and security. Among its diverse range of offerings, the Axis 211A, Axis 210, Axis 211, and Axis 210A stand out as notable models that cater to various surveillance needs.

The Axis 211A is a versatile network camera designed for indoor environments. It is equipped with a 1/3-inch CCD sensor, providing excellent image quality and clarity. With a resolution of up to 640x480 pixels, it delivers detailed video and still images. The camera supports Motion JPEG and MPEG-4, allowing for flexible video streaming options. One of its key features is the built-in audio capability, which enables two-way communication, making it ideal for monitoring sensitive areas or communicating with individuals in the camera's field of view.

The Axis 210, similar to the 211A, focuses on delivering reliable surveillance in indoor settings. It possesses a compact design that facilitates easy installation in various locations. The camera also features a 1/3-inch CCD sensor, ensuring good low-light performance. Its robust web-based interface allows users to adjust settings easily, and with Power over Ethernet (PoE) support, it simplifies connectivity by requiring only a single cable for power and data transmission.

The Axis 211 is designed for outdoor and indoor applications, equipped with an IP66-rated housing that provides protection against dust and water. This feature makes it suitable for demanding environments. With a resolution of 640x480 pixels, it captures clear images while offering remote access capabilities via a standard web browser. Additionally, it supports two-way audio and features like motion detection, enhancing security monitoring.

Lastly, the Axis 210A is another noteworthy model, featuring an integrated microphone and speaker, ideal for applications where audio surveillance is essential. It maintains high-quality video transmission with the same CCD sensor technology as its counterparts. The camera's ability to offer real-time alerts and notifications makes it a valuable addition to any security setup.

In summary, the Axis 211A, 210, 211, and 210A models are equipped with robust technologies and features that cater to various surveillance requirements. From indoor settings with audio capabilities to outdoor environments with protective housings, these Axis models deliver flexibility, high image quality, and reliable performance, making them excellent choices for both residential and commercial security applications.