Bosch Appliances MIC-WKT-IR installation manual Safety Precautions

Page 4

MIC-WKTI and MIC-WKT-IR Installation Manual

Safety Precautions

The following symbols are used throughout this manual please pay careful attention to their meaning.

The lightning flash with an arrowhead symbol within a triangle is intended to alert the user to the presence of non- insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important safety, operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

CAUTION

TO REDUCE THE RISK OF ELECTRICAL SHOCK, DISCONNECT POWER SUPPLY BEFORE OPENING THE POWER SUPPLY UNIT.

POWER DISCONNECT: POWER SUPPLY UNITS HAVE POWER SUPPLIED WHENEVER THE POWER CORD IS INSERTED INTO THE POWER SOURCE

WARNING

INSTALLATION SHOULD BE CARRIED OUT BY

QUALIFIED PERSONNEL ONLY IN ACCORDANCE

WITH THE APPLICABLE LOCAL CODES.

BOSCH SECURITY SYSTEMS ACCEPTS NO LIABILITY

FOR ANY DAMAGES OR LOSSES CAUSED DUE TO

INCORRECT OR IMPROPER INSTALLATION

EN 4

1.Read all instructions prior to installation.

2.Keep this manual for future reference.

3.Heed all warnings.

4.Install according to manufacturer’s instructions.

5.Qualified persons only should install this product, if in doubt consult a qualified installer.

6.Use correct electrostatic discharge handling procedures when handling printed circuit boards to avoid damage to electro-sensitive components.

7.Do not install near any strong heat sources such as furnaces.

8.Never push objects or pour liquids into the product enclosure as this can cause a fire or electrical shock hazard.

9.Only use electronic cleaning solvent in the unlikely event of the card requiring cleaning.

10.Ensure that the product is correctly earthed.

11.Use only the power sources indicated in this user guide and ensure that the current rating of the supply cable is adequate for the product.

12.Do not overload power supply sockets as this can be a fire or electrical shock hazard.

13.In the event of failure do not attempt to service this product yourself, please contact Bosch Security Systems for assistance.

14.Only use approved attachments or accessories specified by the manufacturer. Any changes or modifications made to the equipment, not expressly approved in writing by Bosch Security Systems, could prevent proper or safe operation of the product and will invalidate the warranty.

15.Please dispose of disused electrical & electronic equipment at an environmentally compatible recycling facility (contact Bosch Security Systems for further details).

Bosch Security Systems

Issue 1

Image 4
Contents MIC-WKT and MIC-WKT-IR Installation Manual MIC-WKT and MIC-WKT-IR Introduction Safety Precautions Reference Introduction Features VersionsUnpacking Packaging ContentsWasher Pump Drive Card Functionality Installation of the 705-200 Washer Pump Drive Card MIC400 Non-IR Power Supply PCB LayoutInstallation SK1Connecting a Washer Pump to Infra Red Power Supplies MIC-IR-240PSU MIC-IR-12PSU MIC-IR-24PSU MIC-IR-115PSUSignal Connection Europe, Middle East, Africa Contact AmericasAsia-Pacific