Unpacking
WARNING: Use proper ESD handling precautions to avoid electrostatic discharge. Wear a grounded wrist strap to prevent damage when handling
•Check the exterior of the packaging for visible damage. If any items appear to have been damaged in transit please inform the shipping company.
•Unpack the unit carefully; although ruggedized this is electronic equipment and should be handled with care.
•Do not use if any component appears to be damaged. Please contact Bosch Security Systems in the event of damaged goods.
•The shipping cartoon is the best way to transport the unit, save it & all other packaging materials for future use. If the unit must be returned, use the original packing materials.
Packaging Contents
Please check for the following contents for the
•
•
•Single Jet Washer Nozzle (5mm)
•Two (2) Brackets for mounting the Washer Nozzle
For the
•
•Single Jet Washer Nozzle (5mm)
•Two (2) Brackets for mounting the Washer Nozzle
EN 8
CHAPTER 2 Installation
705-200 Washer Pump Drive Card Functionality
The
A push to test button (SW1) is also provided to test the pump operation and expel air to prime the pump ready for operation.
The drive signal Washer Dr is a TTL signal generated by the MIC400 camera, this TTL signal causes the relay drive transistor to switch on thus energizing the relay and closing the relay contacts thereby activating the supply to the washer pump.
Bosch Security Systems | Issue 1 |