Table Of Contents | TRENDnet S4W1CA specification

Image 2

Contents

VCCI Warning FCC WarningCE Mark Warning TABLE OF CONTENTS ABOUT THIS GUIDE Resource sharing Broadband Internet access sharingINTRODUCTION File sharing UNPACKING AND SETUP RESET HARDWARE INSTALLATION4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER STATUS Check the installation Connect the Internet Broadband Router PC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION 1-2-1 Dynamic IP Cable Modem The MTU feature specifies the largest packet size permitted forThe Maximum Idle Time feature can If required by your ISP, input a host name and MAC address 1-3 DNS Advanced Setup2-1-2 Administrator Settings Password Settings addresses Restore Factory Default 2-1-3 Firmware Upgrade2-1-4 Configuration Tools Backup Settings 2-2-1 Dynamic IP 2-1-7 Reset 2-2 WANIf your ISP is BigPond Australia, check the Enable box 2-2-2 Static IP Select a Dynamic DNS service provider from the dropdown list Use Dynamic DNS Check this option to enable Dynamic DNSService Provider 2-2-4 PPTP Enter the password provided by your Dynamic DNS service provider Enter the username provided by your Dynamic DNS service providerPassword 2-3 LAN To set the LAN’s IP Address 2-3-1 LAN Settings Example 2-5-1 Discard PING from WAN side To block certain client PCs from accessing the Internet2-5 Firewall 2-5-2 Client Filtering TECHNICAL SPECIFICATIONS Five years LIMITED WARRANTYTW100-S4W1CA

TRENDnet S4W1CA manual Table Of Contents