Unpacking And Setup

This chapter provides unpacking and setup information for the Broadband Router.

Unpacking

The box should contain the following items:

One 4-port High Speed Broadband Router

One external power adapter (5V DC, 800mA)

One CD-ROM with User’s Guide

Quick Installation Guide

If any item is found missing or damaged, please contact your local reseller for replacement.

Setup

The setup of the Broadband Router can be performed using the following steps:

The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.

Visually inspect the DC power jack and make sure that it is connected securely to the power adapter.

Make sure that there is proper heat dissipation from and adequate ventilation around the Broadband Router. Do not place heavy objects on the Broadband Router.

Page 5

Image 5

TRENDnet S4W1CA manual Unpacking And Setup

Contents

VCCI Warning FCC WarningCE Mark Warning TABLE OF CONTENTS ABOUT THIS GUIDE INTRODUCTION Broadband Internet access sharingResource sharing File sharing UNPACKING AND SETUP 4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER HARDWARE INSTALLATIONRESET STATUS Connect the Internet Broadband Router Check the installation PC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION The Maximum Idle Time feature can The MTU feature specifies the largest packet size permitted for1-2-1 Dynamic IP Cable Modem If required by your ISP, input a host name and MAC address 2-1-2 Administrator Settings Password Settings Advanced Setup1-3 DNS addresses 2-1-4 Configuration Tools 2-1-3 Firmware UpgradeRestore Factory Default Backup Settings If your ISP is BigPond Australia, check the Enable box 2-1-7 Reset 2-2 WAN2-2-1 Dynamic IP 2-2-2 Static IP Service Provider Use Dynamic DNS Check this option to enable Dynamic DNSSelect a Dynamic DNS service provider from the dropdown list 2-2-4 PPTP Password Enter the username provided by your Dynamic DNS service providerEnter the password provided by your Dynamic DNS service provider 2-3 LAN To set the LAN’s IP Address 2-3-1 LAN Settings Example 2-5 Firewall To block certain client PCs from accessing the Internet2-5-1 Discard PING from WAN side 2-5-2 Client Filtering TECHNICAL SPECIFICATIONS Five years LIMITED WARRANTYTW100-S4W1CA