2-1-7 Reset
The Broadband Router supports the following types of Internet connections: Dynamic IP Address, Static IP Address, PPPoE, and PPTP.
2-2-1 Dynamic IP
The Host Name is optional, but may be required by some Service Providers. The default MAC address is set to the WAN's physical interface on the Broadband Router. If the Service Provider requires the MAC address, type it in. Click the "Clone MAC Address" button to copy the MAC address of the Network Interface Card installed in the PC. The WAN MAC address will be replaced by this MAC address.
If your ISP is BigPond (Australia), check the Enable box.
23
2-2-2 Static IP
If the Service Provider has assigned a fixed IP address, enter the assigned IP address subnet mask and gateway address provided. Click “yes” if are using two or more IP addresses.
2-2-3 PPPoE (Dial-up xDSL)
If you’re connecting to the Internet using a PPPoE (Dial- up xDSL) Modem and your ISP has provided you with a Password and Username, then your ISP uses PPPoE. Select this option, and enter the required information. If the ISP provided a Service Name, enter it in the Service Name field. Otherwise, leave it blank.
The Service Name, IP Address, and DNS Address fields must be completed if your ISP provides you with this information. If your ISP provides a Dynamic IP Address, skip these fields.
24
