How to Use the Menu Functions
Screen Display
•Off
•On
|
|
|
|
| ∗1 |
| |
| Balance |
| |
|
|
| |
|
|
|
|
| White |
| |
|
| ||
|
|
| |
|
|
| Reset to |
|
|
| Defaults |
| ∗1 |
| Gamma |
|
| • 1.8 / 2.0 / 2.2 | |
| Gamma |
| |
|
| / 2.4 / 2.6 | |
|
|
| |
|
|
| Reset to |
|
|
| Defaults |
Settings |
| • On | |
| 16:9 Overscan | ||
Advanced |
| • Off | |
| • PAL | ||
| AV Colour System | ||
|
| • Auto | |
|
| • SECAM | |
|
| • M.NTSC | |
|
| • NTSC | |
Colour Matrix
•SD
•HD
DVI Input Setting
•Normal
•Full
Reset to Defaults
∗1 : PC input mode only
Turns the screen off when you select [Off]
•The sound is active even if the screen turns off.
•Press any buttons (except Standby) to turn the screen on.
•This function is effective in reducing power consumption when listening to the sound without watching the TV screen.
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve
•Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
[On]:Default - Image is overscanned by ~5% beyond the edge of the screen to hide edge video noise
[Off]:Displays image in its original size including edge video noise such as lines, dashes, dots etc.
•Applicable for video signals when TV aspect is set to [16:9]
•Memorised separately for SD and HD channels / signals
Selects optimum colour system based on video signals in AV mode
Available only with 480p or 576p input on video signals in a natural colour from digital equipment connected to AV1 component or HDMI1 / HDMI2 / HDMI3 terminals. Select [SD] or [HD] to adjust suitable colour parameters for [SD] (standard definition) or [HD] (high definition)
•[SD]: Input signal is a normal TV system
•[HD]: Input signal is a high definition system
Changes the black level in the image for HDMI input mode with DVI input signal manually
•When the DVI input signal from the external equipment, especially from PC, is displayed, the black level may not be suitable. In this case, select [Full].
•The black level for HDMI input signal will be adjusted automatically.
•For HDMI input mode with DVI input signal only
Press the OK button to reset the present Picture Viewing Mode of the selected input to the default settings
26
