Bosch Appliances NBN-733 Profile name, Target bit rate, Maximum bit rate, Encoding interval

Page 55

Camera Browser Interface

Encoder Settings en 61

 

 

9.1.3Profile name

If required, enter a new name for the profile.

9.1.4Target bit rate

To optimize use of the bandwidth in the network, limit the data rate for the camera. The target data rate should be set according to the desired picture quality for typical scenes with no excessive motion.

For complex images or frequent changes of image content due to frequent movements, this limit can temporarily be exceeded up to the value entered in the Maximum bit rate field.

9.1.5Maximum bit rate

This maximum data rate is not exceeded under any circumstances. Depending on the video quality settings for the I-frames and P-frames, this can result in individual images being skipped.

The value entered here must be at least 10% higher than the value entered in the Target bit rate field. If the value entered here is too low, it is automatically adjusted.

9.1.6Encoding interval

The Encoding interval slider determines the interval at which images are encoded and transmitted. This can be particularly advantageous with low bandwidths. The image rate in ips (images per second) is displayed next to the slider.

9.1.7Standard definition video resolution

Select the desired resolution for the standard definition video image.

Note:

These resolutions are not used by a HD stream.

9.1.8Expert Settings

If necessary, use the expert settings to adapt the I-frame quality and the P-frame quality to specific requirements. The setting is based on the H.264 quantization parameter (QP).

Bosch Security Systems

Software manual

AM18-Q0635 v5.6 2013.01

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Camera Browser Interface Page Table of Contents Advanced General Settings Basic ModeWeb Interface Camera ALC Encoder SettingsRecording AlarmInterfaces Setting up VCANetwork COM1Snmp Service 113System requirements Browser connection192.168.0.1 Password protection in cameraEstablishing the connection Protected networkRecordings SettingsSystem Overview LivepageImage selection Operation via the browserStatus icons Pan and tilt Cameras with PTZ controlMotion flag Storage discoverySelect an area View Control ROIPre-position ZoomSet positions Cameras with alarm and relay I/OTracking Saving snapshots System Log / Event LogRecording video sequences Audio communication Running recording programProcessor load Selecting recordings for playback PlaybackTrack list Export Search Search results Searching for tracks Exporting tracksClick Start Search Time bar Controlling playbackControls Bookmarks Configuration Menu Settings OverviewBasic Mode Advanced Mode Making Changes NavigationSaving changes Naming Basic ModeDevice Access PasswordConfirm password PasswordTime server type Date/TimeDevice date, time and zone Time server IP addressSubnet mask Click Set and RebootNetwork IP addressSystem Overview EncoderAudio RecordingISCSI Initiator extension Advanced General SettingsIdentification 2 IDConfirm password PasswordDaylight saving time Date formatDevice date / Device time Device time zoneTime server type Time server IP addressTime stamping Alarm mode stampingDisplay Stamping Camera name stampingVideo watermarking Alarm messageAppearance Web InterfaceSelect video player Show overlay iconsJpeg size, interval and quality Livepage Functions Show auto tracker Allow snapshotsAllow local recording Frames-only streamFile for event log LoggingSave event log Save system logCamera Installer MenuLens Wizard Copy mode to Mode menuCurrent mode Mode IDIntelligent AE Low lightVibrant White balance ColorExposure/frame rate ALC2 Day/night Switch levelEnhance Encoder Settings Pixel Counter Privacy MasksSelect G.711, L16 or AAC* as the audio Recording format Encoder Settings Pre-defined profiles Encoder ProfileChanging a profile Target bit rate Standard definition video resolutionExpert Settings Profile nameMin. P-frame QP GOP structureAveraging period Frame distanceBackground quality DefaultObject quality Preview 1 H.264 settingsSelect H.264 Settings Encoder StreamsJpeg stream Regions Encoder RegionsRecording ISCSI Media Storage ManagementDevice manager Recording mediaLocal Media Activating and configuring storage media Deactivating storage media Formatting storage mediaRecording Profiles Stream profile settingsStream Recording track selectionStandard recording Recording includesAlarm input Analysis alarm Video loss alarm Alarm recordingAlarm stream Alarm triggersWeekdays Recording SchedulerHolidays Activate recording Profile namesRecording status Recording Status Alarm Connections AlarmVideo output Video transmissionStream Remote portAuto-connect SSL encryptionAudio Video Content Analyses VCA Audio Alarm Alarm E-Mail Test e-mail Attach Jpeg from cameraDestination address Sender nameAlarm Task Editor VCA Silent VCA Setting up VCAAggregation time s VCA ProfilesAnalysis type Sensitivity Motion detectorMinimum object size Debounce time 1 s Tamper detectionSelecting the area Scene too bright Trigger delay sGlobal change slider Global changeReference check Scene too noisyAppearing edges Camera Browser Interface Setting up VCA en VCA Scheduled Deleting Holidays Trigger active Delay sVCA Event triggered TriggerInterfaces Alarm inputRelay 13.3 COM1 IP V4 address Network AccessNetwork Automatic IP assignmentHttp browser port IP V6 addressDNS server address TCP rate controlTelnet support Interface mode ETHHttps browser port 14.1.9 RCP+ portProvider Enable DynDNSISCSI MSS Byte Network MTU ByteStatus Notification mailSnmp traps AdvancedSnmp 14.2.2 1. Snmp host address / 2. Snmp host addressUPnP AuthenticationQuality of service Rtsp portCloud-based services Multicast EnableMulticast Address Streaming PortMulticast packet TTL Jpeg Image PostingMaximum image width px EnableFace detection File formatAccounts Encryption IP V4 filterFirmware ServiceMaintenance Update serverSSL certificate ConfigurationLicenses Maintenance logUpload history En Service Camera Browser Interface Page Bosch Security Systems
Related manuals
Manual 48 pages 59.65 Kb Manual 44 pages 5.22 Kb

NDN-733, NBN-733 specifications

The Bosch NBN-733 is a notable appliance in the Bosch range, designed to meet the demands of modern households while providing reliable performance and innovative features. This appliance is particularly known for its exceptional efficiency, longevity, and sleek German engineering, making it a favorable choice for consumers looking to enhance their kitchen experience.

One of the standout features of the Bosch NBN-733 is its energy efficiency. Constructed with eco-friendly technology, this appliance boasts high ratings in energy consumption, helping users save on utility bills while reducing their environmental footprint. This commitment to sustainability does not compromise on power or performance, as the NBN-733 delivers outstanding results consistently.

The design of the Bosch NBN-733 is both functional and aesthetic. Its modern and minimalist look seamlessly fits into various kitchen decors, offering both style and practicality. The appliance is built using high-quality materials that ensure durability and ease of maintenance. The thoughtfully designed interior maximizes storage space, making it easy to organize and access kitchen essentials.

Incorporating advanced technologies, the NBN-733 features a state-of-the-art cooking system that offers precise temperature controls for optimal food preparation. The appliance is equipped with multiple cooking modes and pre-set functions that cater to a wide range of culinary needs, from baking to broiling. This versatility allows users to explore their culinary creativity with ease.

Safety is a paramount consideration in the design of the Bosch NBN-733. It includes features such as automatic shut-off systems, child safety locks, and heat-resistant materials, ensuring that the appliance can be used confidently in homes with children or pets. This focus on safety ensures peace of mind for users while they cook or bake.

Another significant aspect of the Bosch NBN-733 is its quiet operation. The appliance is engineered to function with minimal noise, creating a more pleasant cooking environment. This is particularly beneficial for households where multiple activities are performed simultaneously, allowing users to enjoy their time in the kitchen without disruptive sounds.

In summary, the Bosch NBN-733 is a remarkable appliance that exemplifies the brand's commitment to quality, innovation, and user satisfaction. With its energy efficiency, modern design, advanced technologies, safety features, and quiet operation, the NBN-733 is a great addition to any kitchen. Home cooks of all levels will appreciate the convenience and performance this appliance offers, making it a worthy investment for a functional and stylish cooking space.
Top Page Image Contents