Camera Browser Interface | Recording en 73 |
|
|
10.2.1Recording track selection
Standard and alarm recording can be defined for the two recording tracks. You must first select the track before setting up the standard and alarm recording parameters.
1.Click the Recording 1 entry in the list.
2.Set up the standard and alarm recording parameters for track 1 as described below.
3.Click the Recording 2 entry in the list.
4.Set up the standard and alarm recording parameters for track 2 as described below.
Recording includes
Specify whether, in addition to video data, audio or metadata (for example alarms or VCA data) should also be recorded. (To change the global audio format, click the audio recording format link.)
Note:
Including metadata could make subsequent searches of recordings easier but it requires additional memory capacity. Without metadata, it is not possible to include video content analysis in recordings.
10.2.2Standard recording
Select the mode for standard recordings:
–Continuous: the recording proceeds continuously. If the maximum recording capacity is reached, older recordings are overwritten automatically.
–
–Off: no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
–Stream 1
–Stream 2
–I-frames only
Bosch Security Systems | Software manual |