88 en Setting up VCA | Camera Browser Interface |
|
|
12.2VCA - Profiles
Two profiles can be set up with different VCA configurations.
1.In the VCA configuration
2.If necessary, click Default to return all settings of the selected profile to its default values.
To rename a profile:
1.To rename the file, click the icon to the right of the list field and enter the new profile name in the field.
2.Click the icon again. The new profile name is saved.
The current alarm status is displayed for information purposes.
12.2.1Aggregation time [s]
Set an aggregation time of between 0 and 20 seconds. The aggregation time always starts when an alarm event occurs. It extends the alarm event by the value set. This prevents alarm events that occur in quick succession from triggering several alarms and successive events in a rapid sequence. No further alarm is triggered during the aggregation time.
The
12.2.2Analysis type
Select the required analysis algorithm. Motion+ offers a motion detector and essential recognition of tampering.
Metadata is always created for a video content analysis, unless this is explicitly excluded. Depending on the analysis type selected and the relevant configuration, additional information overlays the video image in the preview window next to the parameter settings. With the Motion+ analysis type, for example, the sensor fields in which motion is recorded are marked with rectangles.
Software manual | Bosch Security Systems |