DVR4C Remote Viewer Operation Manual Configuration Tool
EN 11
5Configuration Tool
The Configuration Tool allows an administrator to configure the DVRs connected to the network and their associated cameras.
5.1Registering a DVR
1.Click the Add button in the left bottom corner.
2.Enter a DVR Name for local use, a User name, and a Password.
>The name can be up to 30 characters long.
>The default values of User name/Password are admin/ admin.
3.Select either a Ethernet or
>A phone number is required for a
4.Enter an IP Address and a Port number or click Auto- detect and select an IP address from the list.
5.Click OK.
5.2 Login and configuration
1.Select a DVR in the list of DVRs.
2.Enter the password and click Login.
>The Configuration Tool requires administrator rights to log on to a DVR. The administrator ID is always admin. The
password is set in the Connectivity menu of the DVR4C.
>If a DVR's configuration menu is activated or remote setup is configured as Disable, login is blocked.
When you log in, nine tabs are shown:
•Information
•Camera
•Recording
•Event setup
•Profiles
•System settings
•Connectivity
•Disk manager
•Security
Each of these tab pages allows you to configure different functions of the selected DVR. When you change the value of an item in any of the tabs, click the Apply button to confirm the change. Click the Cancel button to discard changes.
For more information on the settings that can be changed, refer to the DVR4C Installation Manual.